Specifications

No Batteries, Nonvolatile Memory
Nonvolatile EEROM memory retains information indefinitely
after power loss or machine shutdown, eliminating batteries
and related hazards.
Replacing Electromechanical Selsyn Systems
In new installations, the M1150-M10, together with AVG
Automation's brushless resolver series RL100, is a 100% solid-
state replacement for electromechanical Selsyn systems.
PC-Handshake for PLC Synchronization
On an external command, such as data transfer command
from a PLC, the digital shaft angle position can be "frozen" at
the input of the PLC. This ensures that the data are not sam-
pled during transition from one angle to the next, and that the
PLC always reads valid data. The unit may be set-up in trans-
parent mode using keyboard commands.
Reliable Under Extreme Environments
The M1150-M10 combines the ruggedness of a brushless
resolver and reliability of a solid-state control. The resolver can
be mounted on a machine shaft in any hostile environments
such as mechanical shock, vibrations, extreme humidity and
temperature changes, oil mists, coolants, solvents, etc. And the
programmable unit, M1150-M10, can be mounted up to
2500 ft (762 m) away in control panel. The splash-proof oil-
tight front plate of the M1150-M10 unit guarantees perfect
operation even in unfavorable conditions like steel mills. The
ratiometric converter assures high tracking speed (700 RPM)
and high noise immunity.
Built-in Tachometer and Motion Detector
The shaft RPM is displayed continuously on the front panel.
The motion detector output is energized when the shaft is
rotating within programmed motion limits.
A-43
800-TEC-ENGR
www.avg.net
Position Transducers/Sensors
SECTION
A