User Guide

11
USING AND CHARGING THE DEVICE
NOTE: Only use the provided AC adapter.
1 Open the case and place the base with the attached tip inside
the case. the base (front) should face up.
2 Close the case. If the case is not closed, the base may not
charge properly.
3 Connect the provided cable and adapter to the case and plug
the adapter into an active (120-240V) outlet.
4 The case bottom will glow orange when the device is charging
and glow blue when the device is fully charged.
Figure 2. Charging the TrueTear
®
device.
Orange glow indicates device is
charging
Blue glow
indicates device is fully charged
Charge the base
before rst use.
A fully charged
device should last
several days.