Instructions / Assembly

ROBINSON
TECH
INTERNATIONAL
CORPORATION
310 Fairfield Road
Fairfield, NJ 07004
Tel: [phone]
Fax: [phone]
SAFETY FENCE INSTRUCTIONS
• PLACE 1 FENCE POSTS NO MORE THAN 8 FT APART FROM EACH
OTHER
• DRIVE POSTS IN APPROXIMATELY 1.5 FT DEEP USING A MALLET
• LINE UP FENCE ON POSTS BY STRETCHING THEM ACORSS POSTS
AND ATTACHING THEM WITH TIES.
• TIGHTEN FENCE AND SECURE WITH CABLE TIES TO POST, MAKE
SURE TO USE AT LEAST 3-5 TIES TO SECURE THE FENCE.
NOTE: IN HIGH WIND AREAS, IT IS HIGHLY RECOMMENDED THAT THE
FENCE BE TIED BETWEEN THE FLAT SIDE OF THE METALS POSTS AND
A WOOD SLAT.
SUGGESTED TOOLS:
T-POSTS
CABLE TIES
WOOD SLAT
MALLET