User's Manual

www.biomark.com
If the USB drive detection fails, the following screen will appear and allow you to retry or cancel the detection:
5.3 Connecting to PC via Bluetooth
5.3.1 Bluetooth Operation
By default, the Bluetooth module is discoverable and connectable (Slave mode or device).
Bluetooth authentication is enabled. When enabled, Bluetooth uses SSP (Secured Simple Pairing) to pair with
another remote device. The pairing will be done transparently for the user.
NOTE: When Bluetooth authentication is disabled, the default PIN code is 1234. This may be required with
older Bluetooth devices.
If the reader must connect by itself to a remote device, the menu allows to search for the devices in the
vicinity and pair to the desired device. Once a device is selected, the reader will operate as Master and will
constantly try to connect to the associated device. In the Master mode, the reader is not connectable.
NOTE: The Connection to an iPhone or an iPad requires the Master mode.
01234
7:13 PM
09/27/2017
MEMORY
3DD.00075BCD15
FDX-B
USB Drive
No USB drive detected
CancelRetry
01234
7:13 PM
09/27/2017
MEMORY
3DD.00075BCD15
FDX-B
USB Drive
No USB drive detected
CancelRetry
All files are automatically created in a dedicated folder named HPR-Lite. The name of the CSV file has the
following format:
tag_[ID]_[COUNTER].csv
where:
• ID is the Reader ID (2 HEX characters).
• COUNTER starts from 01 and is automatically incremented based on the existing files detected on
the USB Flash drive.
Example: G:\HPR-Lite\tag_A0_01.csv
01234
7:13 PM
09/27/2017
MEMORY
3DD.00075BCD15
FDX-B
USB Drive
Mounting USB drive...
01234
7:13 PM
09/27/2017
MEMORY
3DD.00075BCD15
FDX-B
USB Drive
Mounting USB drive...
01234
7:13 PM
01/27/2016
MEMORY
3DD.00075BCD15
FDX-B
Transferring...
01234
7:13 PM
01/27/2016
MEMORY
3DD.00075BCD15
FDX-B
Transferring...
01234
7:13 PM
09/27/2017
MEMORY
3DD.00075BCD15
FDX-B
Saved in
tag_A0_01.csv
01234
7:13 PM
09/27/2017
MEMORY
3DD.00075BCD15
FDX-B
Saved in
tag_A0_01.csv