User manual

16
General settings
Menu 14 - Menu “general settings”
Item
Sub-Menu
Definition
1
Back
Return to the previous screen
2
Profiles
Recall a profile saved in the reader. By default, the
factory settings can be reloaded.
3
Quick action
Attribute a second feature to the black button (see Menu
15).
4
Vibrator
Enable / Disable vibrator (see Note 20)
5
Buzzer
Enable / Disable audible beeper (see Note 21)
6
Protocol
Select the protocol used by the communication
interfaces (see Menu 16).
7
Language
Select the language (English, French, Spanish or
Portuguese).
Note 25 – A profile is a complete set of settings (read mode, tag storage, Bluetooth
parameters…) corresponding to a use case. It can be created with EID Tag
Manager program and then recalled from the reader menu. The user can save up to
4 profiles.
Menu 15 - Menu “quick action”
Item
Sub-Menu
Definition
1
Back
Return to the previous screen
2
Disabled
No feature attributed to the black button
3
Enter menu
Fast access to the menu.
4
New session
Fast creation of a new session.
5
Re-send last tag
Last read tag is re-sent on all communication
interfaces (Serial, Bluetooth®, USB).
6
MOB reset
Reset the MOB counter when Session|MOB counter
type is selected (See Menu 12)
Note 26 – A quick action is a second feature attributed to the black button. The
reader performs the selected action after a short keystroke of the black button.
Note 27 – If the user holds the black button for over 3 seconds, the device displays
the menu and the quick action is not performed.