User manual

20
If you are using a smartphone or a PDA, an application is required (not supplied). Your
software supplier will explain how to connect the PDA.
Note 36 - We advise that to achieve successful Bluetooth® connection with your
reader, simply follow the implementation methods listed (see the following).
Note 37 - If these implementation methods are not followed, the connection may
become inconsistent, thus causing other reader related errors.
Note 38 - When Windows 7 installs Bluetooth® drivers, it is normal that the driver
for "Bluetooth® Peripheral Device" is not found (see picture below). Windows
cannot install this driver because it corresponds to Apple iAP service needed to
connect with iOS devices (iPhone, iPad).
For reader to PC connection, only "Standard Serial over Bluetooth link" is needed.
Bluetooth
®
– Known Successful Methods
There are 2 scenarios to correctly implement the Bluetooth
®
connection. They are as follows:
1. Reader to a Bluetooth
®
adapter connected to a PC, or to a Bluetooth
®
enabled PC or
PDA.
2. Reader to a Bluetooth
®
adapter connected to a scale head, or to a Bluetooth
®
enabled
device, such as scale head or printer.
These options are discussed in further details below.
Reader to a Bluetooth
®
adapter connected to a PC, or to a Bluetooth
®
enabled PC or PDA
This scenario requires that a process called « Pairing » be undertaken. On the reader, go to
the menu “Bluetooth”, and then select “slave” in the sub-menu “select device” to remove the
previous pairing and allow the reader to return to SLAVE mode.