Users Manual

5
Battery handling instructions” section for more information)
Step 1: Installing the battery pack in the device.
1
Insert the battery in the reader. The pack is keyed for proper
installation.
2
The stationary key should be up towards the display. The
battery pack will “snap” into place when it is properly
inserted. DO NOT FORCE the battery into the reader. If the
battery does not insert smoothly, verify it is properly
orientated.
Step 2: Charging the battery pack.
1
Unscrew the protective cap which guards against foreign
material contamination.
Insert the data-power cable by engaging the connector and
rotating the lock-ring.
2
Plug the power cord into the cable socket located at the end
of the data-power cable.
3
Plug the adapter into a power outlet. The battery icon
indicates the battery pack is in charge with the bars flashing
inside the icon. It also gives the battery charge level.