User's Manual

Note 7 – icon informs that a comparison session is currently active. The

comparison session is displayed between “> <” symbols (ex: “>My List<”).

Note 8 – icon informs that alerts are currently enabled.

Note 9 – Comparison sessions can be uploaded into the reader using EID Tag

Manager PC software or any third-party software implementing this feature. You

can change the comparison session using the reader menu (see Menu 9)

Note 10 – When an alert occurs, the reader will generate a long beep and vibration.

Data entry

Data entry feature can be enabled to associate one or several information to an animal ID.

When an animal is scanned and the data entry feature is enabled, a window pops-up to select

one of the data in the selected data entry list (see below). Up to 3 lists can be used at the same

time for data entry. See Menu 11 to select the desired list(s) or enable/disable data entry

feature.

Note 11 – icon informs that data entry feature is currently enabled

Note 12 – Data entry lists can be uploaded into the reader using EID Tag Manager

PC software or any third-party software implementing this feature.

1. Scan an animal

2. Choose a value and validate

3. Data selected are stored

Note 13 – Up to four data fields can be used for a given tag. If a comparison session

is used and contains three data fields, only one data entry list can be used.

Note 14 – A list named “Default” containing numbers (1, 2…) is always available.

Note 15 – When a tag is read twice or more, the reader will preselect the previously

validated data. If the data entry is different, a duplicate tag is stored in the session

with the new data.

0002 00218

11:06

HDX

SEX:

PRE:

982 0001234

SESSION 9 TOTAL

00245

Male

Twin