User's Manual

The program may ask you to provide a

“Pass Key” for the device. As noted in the

following example, select the option “Let

me choose my own passkey”. The default

passkey for the reader is:

The program will assign 2 communication ports for the reader. Most applications will use the

outgoing port. Make note of this port number for use when connecting to a software program

If this fails use the following links, search the reader in the peripheral list and connect it. You

have to add an outgoing port that makes a connection to the device. Follow the steps described

in the links below.

For Windows XP: http://support.microsoft.com/kb/883259/en-us

For Windows 7: http://windows.microsoft.com/en-US/windows7/Connect-to-Bluetooth-

and-other-wireless-or-network-devices

Reader to a Bluetooth

adapter connected to a scale head, or to a Bluetooth

enabled device, such as scale head or printer.

This scenario requires that the reader lists the Bluetooth

peripherals. Go to the menu

“Bluetooth”, then the sub-menu “Select device” and select “Search new device…”. This will

start the Bluetooth

scanning.

The device you want to connect to will be displayed on the reader. Use the green button to

scroll to the desired device. Select the device by depressing the black button on the reader. The

reader will now connect in MASTER mode.

Note 45 - Sometimes, the Bluetooth

authentication have to be enabled/disabled on

the reader to establish the connection with a remote device. See Menu 6 to switch

authentication on/off.

Note 46 – Your reader can connect to iPhone and iPad (Follow instruction above).

1234