User's Manual

7
3
Plug the adapter into a power outlet. The battery icon
indicates the battery pack is in charge with the bars flashing
inside the icon. It also gives the battery charge level.
4
The battery icon will remain in a fix state when charging has
finished. Charging takes approximately 3 hours.
Remove the power cord.
Unplug the adapter from the power outlet, and remove the
data-power cable inserted in the reader.
Note 1 – Ensure you are using the correct adapter (item 6) provided with the reader.
Power on / off instructions
Press the green button on the reader handle to power on the reader. The main screen will appear
on the display:
Item
Feature
Description of use
1
Battery level
The battery level shows the fully charged level as well as the charge level
during the charge mode. (see “Power Management” section)
2
Bluetooth connection
Indicates Bluetooth® connection status (see “
Bluetooth® management” and “Using Bluetooth® interface” sections for
more details).
3
Current number of ID codes
Number of read and saved ID codes in the current session.
4
Clock
Clock time in 24-hour mode.
5
USB connection
Indicates when the reader is connected to a computer via USB port. (See
“Using USB interface” section for more details)
6
Reader name
Displays the reader name. It appears only upon power on and until a tag is
read.
7
Number of ID codes
Total number of read and saved ID codes in all recorded sessions.
Note 2 - Once activated, the reader will stay on for 5 minutes by default, if it is
powered only by its battery pack.
Note 3 - Depress BOTH buttons for 3 seconds to power off the reader.