Product Brochure

13
www.allfuelhst.com
The storm collar works together with the Roof Flashing to provide
a waterproof seal where the chimney passes through the roof.
The storm collar is installed directly above the flashing and must be
sealed to the chimney pipe using high-temperature silicone sealant
(RTV 500F or better), sold separately.
Storm Collar for 6" Inner Diameter
Chimney Pipe
The rain cap with spark arrester tops off the chimney system to
retain sparks and hot embers from escaping the chimney as well as
to keep rain and snow, debris, and animals from getting inside the
chimney.
Our chimney cap uses the same twist lock connection as the rest of
our products to allow easy removal for cleaning. The spark guard
mesh measures 3/4" to block hot embers from escaping but not
being so small that it will clog up from creosote and ash.
Note: 3/4" mesh is not approved for use in California which requires
5/8" mesh.
Chimney Cap with Spark Screen for 6"
Inner Diameter Chimney Pipe
The Flat Top Chimney Cap tops off the chimney system to keep rain
and snow, debris, and animals from getting inside the chimney.
Our chimney cap uses the same twist lock connection as the rest of
our products to allow for easy removal for cleaning.
Chimney Cap with Flat Top for 6"
Inner Diameter Chimney Pipe
BL.EV.RB-SHT6SC
BL.EV.RB-SHT6RC01
BL.EV.RB-SHT6RC02