Product Brochure

The 30 Degree Elbow Kit is used to get past rafters or away from an
obstruction like plumbing, HVAC, or the roof peak. Up to two
lengths of chimney pipe (for a maximum run of 72" between
elbows) can be added between elbows to allow for necessary
spacing.
An Elbow Strap is included and helps support the weight of the
offset from the elbows. If your installation includes two lengths of
pipe between the elbows a second Elbow Strap (sold separately) is
required.
30 Degree Elbow Kit for 8" Inner
Diameter Chimney Pipe
18
www.allfuelhst.com
Use an Elbow Strap to prevent excessive weight on the elbow
connector for offset installations. Use one elbow strap for ever
length of pipe between the elbows.
Elbow Strap for 8" Inner Diameter
Chimney Pipe
The anchor plate is used to mount double wall Class-A All Fuel
chimney pipe to an appropriate appliance.
Common uses include masonry fireplaces, zero clearance
fireplaces, pizza ovens, outdoor fireplaces, boilers and outdoor
furnaces.
Anchor Plate for 8" Inner Diameter
Chimney Pipe
BL.EV.RB-HST8EL30-KIT
BL.EV.RB-SHT8AN01
BL.EV.RB-SHT8ELS