Product Brochure

The extended roof brace is used to help support the chimney where
it extends more than 5 feet above the roof. Legs adjust from 65–130
inches and pivot at the ring and brackets to fit any roof pitch.
An extended roof brace or other support must be used for every 5
feet of chimney above the roof (if your chimney extends 12 feet
above your roof you need 2 roof support braces).
Note: Extended Roof Brace does not support the weight of the
chimney. It supports the lateral movement only.
24
www.allfuelhst.com
The storm collar works together with the Roof Flashing to
provide a waterproof seal where the chimney passes through
the roof.
The storm collar is installed directly above the flashing and
must be sealed to the chimney pipe using high-temperature
silicone sealant (RTV 500F or better), sold separately.
Storm Collar for 8" Inner Diameter
Chimney Pipe
The rain cap with spark arrester tops off the chimney system to
retain sparks and hot embers from escaping the chimney as well as
to keep rain and snow, debris, and animals from getting inside the
chimney.
Our chimney cap uses the same twist lock connection as the rest of
our products to allow easy removal for cleaning. The spark guard
mesh measures 3/4" to block hot embers from escaping but not
being so small that it will clog up from creosote and ash.
Note: 3/4" mesh is not approved for use in California which requires
5/8" mesh.
Chimney Cap with Spark Screen for 8"
Inner Diameter Chimney Pipe
Extended Roof Brace for 8" Inner
Diameter Chimney Pipe
BL.EV.RB-SHT8SC
BL.EV.RB-SHT8ERB
BL.EV.RB-SHT8RC01