Service manual

512176 21
Section 4 Grounding
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the dryer(s) before servicing.
• Close gas shut-off valve to gas dryer(s) before servicing.
• Never start the dryer(s) with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the dryer is properly grounded.
W001R1
WARNING
20. STACKED DRYER GROUND CONNECTIONS
Refer to Figure 3.
Terminal Block and Rear Bulkhead to Control Cabinet
Motor Terminal Block to Base
Motor to Base
Ground to Control Panel Assembly
Terminal Block and Rear Bulkhead to Control Cabinet to Control Panel
FRONT CONTROL GROUND CONNECTIONS
Refer to Figure 3.
Terminal Block and Rear Bulkhead to Control Cabinet
Motor Terminal Block to Base
Motor to Base
REAR CONTROL GROUND CONNECTIONS
Refer to Figure 3.
Terminal Block and Rear Bulkhead to Control Panel
Motor Terminal Block to Base
Motor to Base
1
2
3
4
5
1
2
3
1
2
3