Operating instructions

ManualsBrandsAlliance Laundry Systems ManualsWasherCABINET HARDMOUNT UC125VNV

Maintenance

F232137

3. Remove back panel, and check overflow hose

and drain hose for leaks.

4. Unlock the hinged lid, and check the supply

dispenser hoses and hose connections.

5. Clean inlet hose filter screens:

a. Turn water off and allow valve to cool, if

necessary.

b. Unscrew inlet hose and remove filter screen.

c. Clean with soapy water and reinstall. Replace

if worn or damaged.

6. Tighten motor mounting bolt locknuts and

bearing bolt locknuts, if necessary.

7. Use compressed air to clean lint from motor.

8. Clean interior of machine, both basket and shell,

by wiping with a water-soaked sponge or cloth.

9. Use compressed air to ensure that all electrical

components are free of moisture and dust.

10. For variable-speed models only, clean AC drive

cooling fan blades monthly (more often if

required by the condition of the air).

a. Open the top cover and remove the control

module cover.

b. Gently wipe the fan blades clean with a dry

cloth.

Quarterly

NOTE: Disconnect power to the machine before

performing the quarterly maintenance procedures.

1. Tighten door hinges and fasteners, if necessary.

2. Tighten anchor bolts, if necessary.

3. Verify that the drain motor shield is in place and

secure.

4. Check all painted surfaces for exposed metal.

(Matching paint is available from the

manufacturer.)

● If exposed metal is showing, paint with primer

or solvent-based paint.

● If rust appears, remove it with sandpaper or by

chemical means. Then paint with primer or

solvent-based paint.

5. Clean customer-supplied steam filter, where

applicable. Refer to Figure 13.

a. Turn off steam supply and allow time for the

valve to cool.

b. Unscrew cap.

c. Remove filter element and clean.

d. Replace filter element and cap.

Figure 13

H042I

1 Cap

2 Filter Element

H042