Specifications
Specification 20 30 40 60 80 100
Perforation size, in. [mm] 0.188 [4.78] 0.188
[4.78]
0.188
[4.78]
0.188
[4.78]
0.188
[4.78]
0.188
[4.78]
Perforation open area, % 17.3 18.6 18.8 18.8 19.6 20.2
Door Opening Information
Door opening size, in. [mm] 11.6 [295] 14.3 [363] 16.3 [414] 16.3 [414] 18.5 [470] 18.5 [470]
Height of door bottom above floor, in.
[mm]
14.38 [365] 14 [356] 14.56 [370] 14.94 [379] 17.91 [455] 17.91 [455]
Height of door opening above floor,
in. [mm]
17 [432] 17 [431] 17.74 [451] 18.12 [460] 20.77 [528] 20.77 [528]
Power Consumption
Average power used per
cycle, kW-hr. (X-voltage
shown)
No load .05 .09 .10 .15 .19 .19
80 % load .06 .11 .14 .22 .28 .28
Estimated Building Heat Load
HVAC load, Btu/hr. [Kcal/hr.] (Non-
heat models)
400 [101] 450 [113] 510 [129] 750 [189] 950 [239] 950 [239]
Drive Train Information
Number of motors in drive train 1 1 1 1 1 1
Drive motor power, hp [kW] * 2 [1.5] 2 [1.5] 3 [2.2] 5 [3.7] 5 [3.7]
Cylinder Speeds
Gentle wash/reverse speed, RPM [G] 37 [0.4] 34 [0.4] 33 [0.4] 31 [0.4] 28 [0.4] 28 [0.4]
Wash/reverse speed, RPM [G] 51 [0.8] 48 [0.8] 46 [0.8] 43 [0.8] 39 [0.8] 39 [0.8]
Distribution speed, RPM [G] 92 [2.5] 86 [2.5] 82 [2.5] 77 [2.5] 70 [2.5] 70 [2.5]
Extract Speed 1 (very low), RPM [G] 301 [27] 282 [27] 269 [27] 252 [27] 230 [27] 230 [27]
Extract Speed 2 (low), RPM [G] 518 [80] 485 [80] 464 [80] 434 [80] 396 [80] 396 [80]
Extract Speed 3 (medium), RPM [G] 579 [100] 542 [100] 518 [100] 485 [100] 443 [100] 443 [100]
Extract Speed 4 (high), RPM [G] 648 [120] 606 [120] 579 [120] 542 [120] 495 [120] 495 [125]
Extract Speed 5 (very high), RPM [G] 710 [150] 664 [150] 635 [150] 594 [150] 542 [150] 542 [150]
Extract Speed 6 (ultra high), RPM [G] 819 [200] 766 [200] 733 [200] 686 [200] 626 [200] 568 [165]
Direct Steam Heating (Optional)
Steam inlet connection size, NPT 1/2 1/2 1/2 1/2 1/2 1/2
Number of steam inlets ** ** 1 1 1 1
Steam required to raise
bath water temperature
10°F/lbs. [10°C/kg]
LOW .74 [0.34] .94 [0.43] 2.09 [0.94] 3.80 [1.63] 3.80 [1.72] 3.80 [1.72]
MED 1.07 [0.49] 1.28 [0.58] 2.40 [1.09] 4.65 [2.11] 4.65 [2.11] 5.49 [2.49]
HIGH 1.44 [0.65] 1.74 [0.79] 2.84 [1.29] 5.79 [2.63] 5.79 [2.63] 6.84 [3.10]
Table 1 continues...
Specifications and Dimensions
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
15 Part No. F8429301ENR15