Specifications

Cast-in-place Anchors (refer to Table 18 )
CHM2438N_SVG
5
A
D
E
B
C
1
2
4
3
1. Machine Frame Base
2. Grout
3. Anchor Bolt (minimum Grade 5 SAE rating)
4. Concrete
5. Edge of Pad
Figure 20
Minimum Anchoring Specifications, in. [mm]
Description 20-40 60 80-100
Number of Bolts 4 or 6* 6 6
A Bolt Length 6 [152] 6 [152] 8.75 [216]
B Thread Extension 2.5 [64] 2.5 [64] 2.75 [64]
C Bolt Diameter 5/8 [16] 5/8 [16] 3/4 [19]
D Embedment Depth 3.5 [89] 3.5 [89] 6 [152]
E Distance from Bolt Center to Edge of
Concrete Pad
Refer to Table 8 Refer to Table 8 Refer to Table 11
* On 20-40 pound models, the four (4) corner bolts are required and the two (2) center bolts are optional when mounting a machine
or elevated base frame to floor.
Table 18
Floor Load Data
Specification 20 30 40 60 80 100
Static floor load, lbs. [kN] 420 [1.87] 570 [2.54] 700 [3.11] 940 [4.18] 1550 [6.89] 1670 [7.51]
Static pressure, lbs.-ft
2
[kN-m
2
] 96 [4.60] 99 [4.74] 100 [4.79] 106 [5.08] 137 [6.56] 147 [7.04]
Table 19 continues...
Installation
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
43 Part No. F8429301ENR15