Instruction manual
Programming NetMaster
69
F232151
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
37. Set Real-Time Clock Day “+037”
This option allows the owner to set NetMaster’s
internal clock to the correct day of the week.
How to Program the Clock Day
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES (+) or the COLD (-)
keypad until “PrOg” appears in the VFD. Press
the START (enter) keypad and “+001” will
appear in the VFD.
Figure 111
3. Press the DELICATES (+) or the COLD (-)
keypad to scroll through the programmable
options until “+037” appears in the VFD. Refer
to Figure 112.
Figure 112
4. When “+037” appears in the VFD, press the
START (enter) keypad. The current day of the
week will appear in the VFD.
5. Press the DELICATES (+) or the COLD (-)
keypad to increase or decrease the day until
correct. Refer to Figure 113.
NOTE: Sunday is considered day one (001), Monday
is day two (002) and so on.
Figure 113
6. Press the START (enter) keypad when the correct
day appears in the VFD. The next option, “+038”,
will appear in the VFD.
NOTE: To program “+038” (Set Real-Time Clock
Date), refer to option 38. To program other options,
refer to the appropriate section.
How to Exit Programming Feature
1. Be sure the control shows a programmable option,
not a value.
2. While pressing and holding the NORMAL
keypad with one hand, press the PERM PRESS
keypad with the other hand. The control will
revert back to the Ready Mode. Refer to
Figure 2.
C762I
C798I
B029R
1 Press this pad (+) to scroll forward or increase a value
2 Press this pad (enter) to choose a selected value or
option
3 Press this pad (-) to scroll back or decrease a value
neednew#2
1
32