Instruction manual

Programming NetMaster
F232151
70
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
38. Set Real-Time Clock Date
“+038”
This option allows the owner to set NetMaster’s
internal clock to the correct day of the month.
How to Program the Clock Date
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES (+) or the COLD (-)
keypad until “PrOg” appears in the VFD. Press
the START (enter) keypad and “+001” will
appear in the VFD.
Figure 114
3. Press the DELICATES (+) or the COLD (-)
keypad to scroll through the programmable
options until “+038” appears in the VFD. Refer
to Figure 115.
Figure 115
4. When “+038” appears in the VFD, press the
START (enter) keypad. The current day of the
month will appear in the VFD.
5. Press the DELICATES (+) or the COLD (-)
keypad to increase or decrease the day of the
month until correct. Refer to Figure 116.
Figure 116
6. Press the START (enter) keypad when the correct
day of the month appears in the VFD. The next
option, “+039”, will appear in the VFD.
NOTE: To program “+039” (Set Real-Time Clock
Month), refer to option 39. To program other
options, refer to the appropriate section.
How to Exit Programming Feature
1. Be sure the control shows a programmable option,
not a value.
2. While pressing and holding the NORMAL
keypad with one hand, press the PERM PRESS
keypad with the other hand. The control will
revert back to the Ready Mode. Refer to
Figure 2.
C762I
C799I
B029R
1 Press this pad (+) to scroll forward or increase a value
2 Press this pad (enter) to choose a selected value or
option
3 Press this pad (-) to scroll back or decrease a value
neednew#2
1
32