Instruction manual
Programming NetMaster
71
F232151
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
39. Set Real-Time Clock Month
“+039”
This option allows the owner to set NetMaster’s
internal clock to the correct month.
How to Program the Clock Month
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES (+) or the COLD (-)
keypad until “PrOg” appears in the VFD. Press
the START (enter) keypad and “+001” will
appear in the VFD.
Figure 117
3. Press the DELICATES (+) or the COLD (-)
keypad to scroll through the programmable
options until “+039” appears in the VFD. Refer
to Figure 118.
Figure 118
4. When “+039” appears in the VFD, press the
START (enter) keypad. The current month will
appear in the VFD.
5. Press the DELICATES (+) or the COLD (-)
keypad to increase or decrease the month until
correct. Refer to Figure 119.
Figure 119
6. Press the START (enter) keypad when the correct
month appears in the VFD. The next option,
“+040”, will appear in the VFD.
NOTE: To program “+040” (Set Real-Time Clock
Year), refer to option 40. To program other options,
refer to the appropriate section.
How to Exit Programming Feature
1. Be sure the control shows a programmable option,
not a value.
2. While pressing and holding the NORMAL
keypad with one hand, press the PERM PRESS
keypad with the other hand. The control will
revert back to the Ready Mode. Refer to
Figure 2.
C762I
C800I
B029R
1 Press this pad (+) to scroll forward or increase a value
2 Press this pad (enter) to choose a selected value or
option
3 Press this pad (-) to scroll back or decrease a value
neednew#2
1
32