Instruction manual

Programming NetMaster
73
F232151
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
41. Set Real-Time Clock Century
“+041”
This option allows the owner to set NetMaster’s
internal clock to the correct century.
How to Program the Clock Century
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES (+) or the COLD (-)
keypad until “PrOg” appears in the VFD. Press
the START (enter) keypad and “+001” will
appear in the VFD.
Figure 123
3. Press the DELICATES (+) or the COLD (-)
keypad to scroll through the programmable
options until “+041” appears in the VFD. Refer
to Figure 124.
Figure 124
4. When “+041” appears in the VFD, press the
START (enter) keypad. The current century will
appear in the VFD.
5. Press the DELICATES (+) or the COLD (-)
keypad to increase or decrease the century until
correct. Refer to Figure 125.
NOTE: The digits “20” are used for century.
Figure 125
6. Press the START (enter) keypad when the correct
century appears in the VFD. The next option,
“+042”, will appear in the VFD.
NOTE: To program “+042” (Normal PreWash #1
Fill/Tumble Time), refer to option 42. To program
other options, refer to the appropriate section.
How to Exit Programming Feature
1. Be sure the control shows a programmable option,
not a value.
2. While pressing and holding the NORMAL
keypad with one hand, press the PERM PRESS
keypad with the other hand. The control will
revert back to the Ready Mode. Refer to
Figure 2.
C762I
C802I
B029R
1 Press this pad (+) to scroll forward or increase a value
2 Press this pad (enter) to choose a selected value or
option
3 Press this pad (-) to scroll back or decrease a value
neednew#2
1
32