Instruction manual

Programming NetMaster
89
F232151
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
71. Special Wash Wash Fill/Tumble
Time “+071”
This option allows the owner to set the amount of wash
fill/tumble time for the Special Wash cycle.
How to Program Special Wash Wash
Fill/Tumble Time
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES (+) or the COLD (-)
keypad until “PrOg” appears in the VFD. Press
the START (enter) keypad and “+001” will
appear in the VFD.
Figure 171
3. Press the DELICATES (+) or the COLD (-)
keypad to scroll through the programmable
options until “+071” appears in the VFD. Refer
to Figure 172.
Figure 172
4. When “+071” appears in the VFD, press the
START (enter) keypad. The current number
of minutes set for the Special Wash Wash
Fill/Tumble Time will appear in the VFD.
5. Press the DELICATES (+) or the COLD (-)
keypad to increase or decrease the current
number of minutes displayed in the VFD to the
desired number of minutes. Refer to Figure 173.
NOTE: The Special Wash Wash Fill/Tumble Time
can be set from zero (0) to 15 minutes.
Figure 173
6. Press the START (enter) keypad when the correct
number of minutes appears in the VFD. The next
option, “+072”, will appear in the VFD.
NOTE: To program “+072” (Special Wash Rinse
#1 Fill/Tumble Time), refer to option 72. To
program other options, refer to the appropriate
section.
How to Exit Programming Feature
1. Be sure the control shows a programmable option,
not a value.
2. While pressing and holding the NORMAL
keypad with one hand, press the PERM PRESS
keypad with the other hand. The control will
revert back to the Ready Mode. Refer to
Figure 2.
C762I
CHM8R
B029R
1 Press this pad (+) to scroll forward or increase a value
2 Press this pad (enter) to choose a selected value or
option
3 Press this pad (-) to scroll back or decrease a value
neednew#2
1
32