Clothes Dryer User Manual

70444801

Programming UniLinc

System Menu

The System Menu allows the user to access: cycle

programming, diagnostics and laundry management.

While on the Cycle Menu press and hold ,

then , then to enter the System Menu.

The System Menu is a submenu of the Cycle Menu.

The navigation of the System Menu is different from

the Cycle Menu. In the Cycle Menu, the highlighted

text box was stationary. In the System Menu, the

ARROW keypads control the location of the

highlighted text box. Text will remain at the same

location but the highlighted box will move when the

, , , and keypads are pressed.

Press the keypad to enter selected menu.

Press the keypad to return to the Cycle Menu

screen.

Save Changes Menu

The Save Changes Menu is used to confirm

programming changes when modifying a cycle or the

values of the Global Settings. The Save Changes

Menu will default to Yes. Using

the or keypad will move the cursor

between Yes or No. Press the keypad to make a

selection. Once the keypad is pressed, the

display will either return to the Modify Cycle Menu or

the Global Setup Menu depending in which submenu

the display was in.

TMB1312R

Figure 21

Laundry

Management

System Menu

DiagnosticProgram

PHM1021R

Figure 22

Save Changes?

NoYe s