Installation Guide

13.5
Cap
Shelf
Backplate
Screw
0.7
Step 1:
Determine your desired location for installation and make a mark for the location . Make 2 marks where mounting screws will
be placed as shown below. Make sure shelf is level when marking for location of installation.Drill hole at each end of the
marks.
Drill holes in Wall for Backplate Mounting
Attach Shelf to Backplate
Step 2:
Unscrew Caps.Then mount Backplates to desired location and screw them in placed.Then insert shelf into Backplates and
screw Caps.
433T-18
INSTALLATION INSTRUCTIONS
No portion of this document or any artwork contained herein should reproduced in any way without the written conset of ALLIED BRASS INC.