Installation Guide

19"

0.496

0.25

DETAIL O

Step 1:

Determine your desired location for installation and make a mark for the location of the base plate. Make 2 marks each side

where mounting screws will be placed as shown below. Drill hole at each of the marks.

Drill holes Ceiling to mount base plate.

CH-90

INSTALLATION INSTRUCTIONS

No portion of this document or any artwork contained herein should reproduced in any way without the written conset of ALLIED BRASS INC.

PAGE 1
CH-90 INSTALLATION INSTRUCTIONS Step 1: Drill holes Ceiling to mount base plate. Determine your desired location for installation and make a mark for the location of the base plate. Make 2 marks each side where mounting screws will be placed as shown below. Drill hole at each of the marks. 19" 0.25 0.496 O DETAIL O No portion of this document or any artwork contained herein should reproduced in any way without the written conset of ALLIED BRASS INC.
PAGE 2
CH-90 INSTALLATION INSTRUCTIONS Step 2: Attaching Base Plate to Ceiling Loosen threaded rod. Then fasten base plate with screws provided to the ceiling. BASE PLATE BASE TUBE SCREW P DETAIL P MIRROR PERSPECTIVE No portion of this document or any artwork contained herein should reproduced in any way without the written conset of ALLIED BRASS INC.