Installation Guide

19.50
Drilled Hole
Bracket
GLRT-22
SCREW
BRACKET
DRILLED HOLE
ANCHOR
Step 1:
Determine your desired location for installation and make a mark for the location of the mounting bracket. Make 2 marks
where mounting screws will be placed as shown below. Make sure shelf is level when marking for location of installation.
Drill hole at each end of the marks.
Drill holes in Wall for screw anchors
Attach Shelf to mounting Surface
Step 2:
PR-5TB-22
INSTALLATION INSTRUCTIONS
No portion of this document or any artwork contained herein should reproduced in any way without the written conset of ALLIED BRASS INC.