© 2018 Allied Moulded Products, Inc. Product Specification Sheet
Brand: Pushbutton Series
Catalog #: AM2PB
Height: 6.01 in.
Width: 3.31 in.
Depth: 3.13 in.
Usable Depth: 3.06 in.
Volume: 71 cu. in.
Carton Quantity: 1
Carton Weight: 2 lb.
Country of Origin: United States of America
Product DescriptionProduct Description
Wall mount enclosure assembly with 2 pushbutton holes in cover
Cover Type: Lift-Off 4-Screw Solid/Opaque Cover (30.5 mm PB Hole Size)
Non-corrosive, non-conductive, light weight
with lower installation cost, easy to modify and
longer life cycle compared to steel. Rigid design
with back panel inserts plus stainless steel
mounting brackets and a gasket system
encased in a continuous channel on the cover.
Enclose and protect electrial and electronic
controls, instruments or components for indoor
and outdoor applications. Especially well suited
for extreme temperature and corrosive
UL 508A, UL 50 and UL 50E Types 1, 2, 3, 3R, 4, 4X, 12 and 13; File No. E120175
CSA-C22.2 No. 14 and CSA C22.2 No. 94 Types 1, 2, 3, 3R, 4, 4X, 12 and 13; File No. 89590
1. EN / IEC 60204-1 and 60529 Type IP66
2. RoHS directive
RAL 7035 - Gray
ULTRAGUARD® Fiberglass reinforced polyester -
compression molded SMC box and Cover
316 stainless steel external hardware (hinges, latches and fasteners)
316 stainless steel mounting brackets
Plated carbon steel internal hardware
Polyurethane (FIP) Formed-In-Place gasket system