Cut Sheet

ULTRAPLUG
®
hole plugs are designed to plug and seal unused
holes in metallic, aluminum and nonmetallic enclosures. They
fit a wide range of sizes, so there is no need for restrictive hole-
centering spacers. The self-centering, anti-rotational design
insures quick and simple one-person nut assembly and no tools
are required for tightening and maintaining a NEMA 4X enclosure
rating. To learn more, visit alliedmoulded.com.
www.alliedmoulded.com
HOLE PLUG FEATURES
• Innovative plug “fins” have self-
centering, anti-rotational design
for fast and easy one-person plug
assembly and no-tools tightening
• Plugs fit a wide range of hole sizes
without the use of restrictive hole-
centering spacers
• Patented design: US Pat. No.
9,045,932
• UL
®
listed and recognized
component for use with CSA
®
listed
enclosure products
• EN / IEC 60204-1 and 60529 Type IP66
• Molded material of construction for
a wide range of chemical compatible
applications (polycarbonate with
neoprene/EPDM gasket)
• Assembly designed to maintain
applicable NEMA/UL/CSA enclosure
ratings
*Note: For use on at smooth
surfaces of Type 1, 3R, 4, 4X and 12
enclosures
• Designed for use with wall
thicknesses from 16 gauge through
¼"
• Designed for use with all metallic
and nonmetallic enclosure materials
• Low profile interior nut and exterior
plug saves valuable panel space
• Capable of sealing unused holes
ranging in size from ½" to 4-¾"
SIMPLE INSTALLATION
1. Push and twist the plug into the
hole, engaging the fins.
2. Screw in and tighten the nut until the
plug bottoms out on the substrate.
Hand tighten only.
CONTACT INFORMATION
Allied Moulded Products Inc.
222 North Union Street
Bryan, OH 43506 USA
Phone: [phone]
Fax: [phone]
Email: [e-mail]
AMHS Series
Scan to learn
more about
ULTRAPLUG
®
Enclosure Hole Plug Assemblies
Plug
with fins
Nut
Available in two
standard colors:
RAL 7035 Light Gray
ANSI 61 Dark Gray


Time
Saving
Installation!