User's Manual

AT-TQ2450 Wireless Access Point User’s Guide
143
Trap type to send
(continued)
- Filtered STA: This trap is sent when the
access point blocks an unauthorized
wireless client from accessing the network
because the client is not authorized by the
MAC address filter.
- RADIUS Authentication (Success): This
trap is sent when a wireless client
successfully logs on the network using
RADIUS.
- RADIUS Authentication (Fail): This trap
is sent when a wireless client fails to log
on successfully using RADIUS.
Hostname or IP address Specify the SNMP trap receivers to
receive traps from the access point. Here
are the guidelines:
You may specify up to three trap
receivers.
You may specify only one trap receiver
per field.
You have to click the Enabled dialog box
before you can enter or modify a trap
receiver.
You may specify a trap receiver by its IP
address or DNS hostname.
You may not specify an IP address range.
Table 24. SNMP (Continued)
Field Description