User's Manual

AT-TQ2450 Wireless Access Point User’s Guide

Table 6. WPA Enterprise

Field Description

WPA Versions Select the WPA version. The options are

listed here:

- WPA: Select this option if all the wireless

clients of the VAP support WPA, but not

WPA2.

- WPA2: Select this option if all the clients

support WPA2, but not WPA. This is the

default setting.

- Both WPA and WPA2 - Select both

options if the VAP has both WPA and

WPA2 clients.

- Enable-pre-authentication: Select this

option if the VAP has WPA2 clients and

you want the access point to share the

pre-authentication packets from the

clients with other access points. This can

speed up authentication for roaming

clients who connect to multiple access

points. This option does not apply to WPA

clients.

Cipher Suites Select the cipher suite for the VAP, The

options are listed here:

- TKIP

- CCMP (AES)

- Both TKIP and CCMP (AES)

When both TKIP and CCMP (AES) are

selected, clients configured to use WPA

with RADIUS must have one of the

following:

- A valid TKIP RADIUS IP address and

RADIUS key.

- A valid CCMP (AES) IP address and

RADIUS key.

RADIUS IP Address Enter the IPv4 address of the primary

RADIUS server.