User guide

Port Numbering Hardware Provisioning
2-5
Telesyn Service Guide (Optimizing Data Services (SHDSL))
2.4 Hardware Provisioning
2.4.1 Port Numbering
SHDSL ports are numbered 0 through 15. Once in bonded mode, the bonded ports are identified by even port
numbers only (0, 2, 4, 6, 8, 10, 12, 14) and only 8 bonded ports are presented to the user for configuration.
2.4.2 CPE Devices
For SHDSL Normal (2-wire) or Bonded (4-wire) service, an equivalent G.991.2 modem is required at the sub-
scriber’s premises.
The SHDSL16 also supports non-standard 4-wire operation to older Globespan CPEs.
Also, adjacent ports or wire pairs on the SM must be used when cabling a subscriber line for 4-wire service.
UDP Port Source Y Y
UDP Port Dest. Y Y
VID Y Y
InnerVID N N
Priority N N
IP TOS N N
IP DSCP N N
TCP Flags N N
VID Priority N N
Traffic Management
VLAN - VC Mapping N N
IP Filtering Y Y
ARP Filtering Y Y
MAC Limiting Y Y
Remarking N N
Ingress Metering/Policing Y Y
Queue Mapping Y Y
Egress Rate Limiting N N
No. of Queues 4 4
ACL Y Y
TABLE 2-1 Feature Interactions for SHDSL Service (Continued)
Feature 2-wire 4-wire Notes