Installation guide

VLAN
100
It may take Windows a few moments to renumber the adapter.
When this has been completed, the window shown in Figure 86 is
displayed.
Figure 86 Set VLAN ID Window
6. Select or enter the correct VLAN ID. This VLAN ID is determined by
the system administrator; please contact the administrator for the
correct VLAN information. For this example, we will se the VLAN ID
to 2 then select OK.
The window shown in Figure 87 is displayed.
Figure 87 VLAN Setup Window
A new Local Area Connection appears under Current VLANs. The
connection number may vary depending on your system.
7. Select OK.
8. From the Local Area Connection Properties window, select OK.
2