Datasheet

The Allied Telesis AT-2701FTXa 100Mbps Fast Ethernet dual-port ber and
copper network interface card features a small footprint and a low-prole
option, making it a perfect choice for PCs equipped with small desktop
solutions.
Management Software
» VLAN support
Advanced Properties
» PCI 2.2 compliant
» Wake-on-LAN (WoL)
supported (enabled by default,
utility to disable available in
firmware)
» Secured transmissions
» Diagnostics
» Remote boot (PXE 2.1)
» Driver support for popular
operating systems
» RJ-45 connector
» Available with SC or ST
connections
» Compliant with the Trade
Agreement Act
» Microsoft-certified drivers
» RoHS compliant
» Low-profile and standard
height brackets included
» IPv6
» Can also be used in PCI-x bus
Manageability and Flexibility
The AT-2701FTXa features a full line of
card assistant software. With a choice
of connectors — ST or SC — the AT-
2701FTXa meets the requirements of
most installations.
Key Features
Specifications
Management Features
Windows Management Instrumentation (WMI)
ACPI 2.0/w01
PXE 2.1 Boot ROM
Bus Type
PCI 2.2
Network Type
100FX
10/100TX
Network Controller
Realtek 8139
Ethernet
IEEE 802.1Q VLANs
IEEE 802.2 LLC
IEEE 802.3ac MAC
IEEE 802.3u Fast Ethernet
Drivers
Windows 7, 64-bit
Windows 7, 32-bit
Windows XP, 32-bit
Linux 2.6
Interface Type and Connectors
SC connector
ST connector
RJ-45 connector
Optical receive sensitivity (typ) -34 dBm
Transmit optical power (min/max) -19 / -14 dBm
Status Indicators
LNK On Active Port (Fiber or Copper) link up
Off Active Port (Fiber or Copper) link down
ACT Blink Activity
Power
Typical power consumption 2.5 Watts at 3.3V
Signaling voltage 3.3 / 5V
Environmental Specifications
Operating temperature 0ºC to 40ºC (32°F to 104°F)
Relative humidity 5% to 90% (non-condensing)
Storage temperature -25ºC to 70ºC (-13°F to 158°F)
Physical Characteristics
Dimensions (W x H) 12.5 cm x 6.4 cm (4.9 in x 2.5 in)
Ships with low-profile bracket attached to interface card.
Standard bracket included in packaging.
Ordering Information
AT-2701FTXa/aa-xxx
100Mbps Fast Ethernet dual-port fiber and copper
network interface card
Where aa = SC or ST
Where xxx = 001 for single pack
901 for single pack, Federal and Government
Ships with low-profile bracket attached to interface card.
Standard bracket is included in packaging.
617-000456 Rev. A
Compliance
RoHS
UL
FCC/EN55022 Class A
TUV
EN55024
CE
C-TICK
VCCI
alliedtelesis.com
© 2012 Allied Telesis, Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners.
North America Headquarters | 19800 North Creek Parkway | Suite 100 | Bothell | WA 98011 | USA | T: [phone] | F: [phone]
Asia-Pacic Headquarters | 11 Tai Seng Link | Singapore | 534182 | T: [phone] | F: [phone]
EMEA & CSA Operations | Antareslaan 18 | 2132 JE Hoofddorp | Netherlands | T: [phone] | F: [phone]
AT-2701FTXa
PCI 32-BIT FAST ETHERNET FIBER AND COPPER
NETWORK INTERFACE CARD
Network Interface Cards
PRODUCT INFORMATION