Installation guide

AT-2973SX, AT-2973T, AT-2973T/4, and AT-VNC10S Adapters Installation and User’s Guide

Replacing the Bracket

The AT-2973SX, AT-2973T, AT-VNC10S adapters are shipped with the

low-profile bracket attached to the adapter. In addition, the standard

bracket is included in the shipment. Depending on your PC, you may need

to replace the bracket attached to your adapter.

Note

The AT-2973T/4 adapter is shipped with a standard bracket

attached to the card. A low-profile bracket is not included with this

adapter.

The following procedure describes how to remove the low-profile bracket

from the adapter and replace it with the standard bracket. You can also

use this procedure to remove the standard bracket and replace it with the

low-profile bracket.

To replace the low-profile bracket with the standard bracket, do the

following:

1. Remove the screws that attach the bracket to the adapter. See

Figure 9.

Figure 9. Removing the Low-Profile Bracket

1697

ACT LNK

ATI