Operation Manual

Chapter 27: IGMP
296 Section II: Web Browser Interface
Configuring IGMP
To configure the IGMP settings, perform the following procedure:
1. From the Advanced Config menu, select IGMP Snooping.
The IGMP Snooping page opens, as shown in Figure 89.
Figure 89. IGMP Snooping Page
2. To enable or disable IGMP, select Enable or Disable from the IGMP
Snooping Status list.
3. To set the age-out timer, type a number in the IGMP Snooping Age-
Out Timer field.
The range is 280 to 420 seconds and the default is 360 seconds.