AT-8316F/MT AT-8316F/VF AT-8316F/SC AT-8324 Fast Ethernet Switches Quick Install Guide PN 613-10812-00 Rev A
Copyright 1999 Allied Telesyn International, Corp. 960 Stewart Drive Suite B, Sunnyvale CA 94086, USA All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesyn International, Corp. Ethernet is a registered trademark of Xerox Corporation. All other product names, company names, logos or other designations mentioned herein are trademarks or registered trademarks of their respective owners. Allied Telesyn International, Corp.
Electrical Safety and Emission Compliance Statement Standards: This product meets the following standards U.S. Federal Communications Commissi RADIATED ENERGY Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Table of Contents Electrical Safety and Emission Compliance Statement .......................iii AT-8316F and AT-8324 Ethernet Switches ................................................ 1 System Models .................................................................................................... 1 Installing the Switch .......................................................................................... 3 Verifying the Package Contents .............................................................
AT-8316F and AT-8324 Ethernet Switches The AT-8316F and the AT-8324 Ethernet switches offer Ethernet, Fast Ethernet, and Gigabit Ethernet connectivity over fiber optic or twisted pair cabling. The systems come pre-installed with the AT-S25 software and the menu-based Omega management program, which simplifies switch configuration and network management. You can install the switches as standalone units or you can interconnect the switches together to form a logical switch.
System Models Figure 1 illustrates the front panel of the Ethernet switches.
AT-8316F and AT-8324 Quick Install Guide Installing the Switch The following sections explain how to install the Ethernet switch in your network. Verifying the Package Contents Make sure the following components are included in the switch package. If any of these items are missing or damaged, contact your sales representative.
Installing the Switch Warning Lightning Danger: Do not work on this equipment or cables during periods of lightening activity ! 9 Warning Power cord is used as a disconnection device: To de-energize equipment, disconnect the power cord. ! 10 Warning Electrical-Type Class 1 Equipment: This equipment must be earthed. The power plug must be connected to a properly wired earth ground socket outlet. An improperly wired socket outlet could place hazardous voltages on accessible metal parts.
AT-8316F and AT-8324 Quick Install Guide Installing the Switch On a Desktop The Ethernet switch can be installed in a standard 19-inch rack or on a table or desktop. To install the switch in a rack, go to the section “Installing the Switch in a Rack” on page 8. To install the switch on a table or desktop, perform the following steps: 1. Remove all components from the shipping package and store the packaging material in a safe location. 2. Locate a level, secure surface for the switch. 3.
Installing the Switch Note Do not set the Stack ID switch to 0. A setting of 0 is invalid. 6. Apply AC power to the switch by plugging the power cord into the AC power connector on the back panel of the unit (shown in Figure 3) and plugging the other end into a wall outlet. R.P.S.
AT-8316F and AT-8324 Quick Install Guide RS-232 TERMINAL PORT STATUS L Fault LED FAULT MASTER RPS PWR RESET Figure 4 Fault LED 7. If you purchased a redundant power supply (RPS) unit for the Ethernet switch, connect the RPS unit to the R.P.S. Input connector (Figure 3) on the rear of the switch by following the directions included with the RPS system.
Installing the Switch Installing the Switch in a Rack To install the Ethernet switch in a standard 19-inch rack, perform the following procedure: 1. Remove all components from the shipping package and store the packaging material in a safe location. 2. Locate a level, secure surface for the switch. 3.
AT-8316F and AT-8324 Quick Install Guide Caution Air vents must not be blocked and must have free access to the room ambient air for cooling. ! 13 7. For instructions on building a stack by interconnecting this switch with other switches, refer to either of the following manuals for instructions: AT-8316F/MT, AT-8316F/VF, AT-8316F/SC, and AT-8324 Installation Guide or AT-Stack8 Stacking Matrix Module Installation Guide. 8.
Installing the Switch Caution If you intend to use a redundant power supply (RPS) with the switch, check to be sure that the cable with the RPS unit is compatible with the RPS Input Port on the switch. The pin assignments for the port are listed in the section “R.P.S. Input Connector Specifications” on page 13. 11. Connect the data cables, making sure each connection has a good valid link and that the switch is receiving packets. 12.
AT-8316F and AT-8324 Quick Install Guide You are now ready to use the Omega management software to configure the switch. For instructions, refer to the AT-S25 Management Software User’s Guide. This guide is available on the Allied Telesyn web site at www.alliedtelesyn.com/techhome.htm. Switch LEDs Table 2 and Table 3 describe the functions of the LEDs on the Ethernet switch. Table 2 Power and Fault LEDs LED State Description Fault Solid Red The switch or management software is malfunctioning.
AT-S25 Software Default Setting Table 3 Port LED Status LEDs State Description L/A (Link/Activity) Solid Green This indicates a 100 Mbps link. Flashing Green This indicates 100 Mbps activity Solid Amber This indicates a 10 Mbps link (10/100 ports only). Flashing Amber This indicates 10 Mbps activity (10/100 Mbps ports only). Solid Green The port is operating at full-duplex. Solid Amber The port is operating at half-duplex. Flashing Amber Collisions are occuring on the line.
AT-8316F and AT-8324 Quick Install Guide Settings Default Telnet Access Enabled System Name None Omega Password No password assigned Omega Time-out Value 5 minutes Download Password ATS25 8324 Duplex Mode Auto-negotiating 8316F Duplex Mode Full-duplex High Port Speed Auto-negotiating Active Aging Time (MAC address table) 300 seconds Domain Name None VLAN Name Default VLAN (all ports) PVID/VID 1 R.P.S. Input Connector Specifications Table 5 lists the pin assignments for the R.P.S.
Additional Documentation Table 5 RPS Input Port Pin Assignments Pin Number Function 8 +5V dc 9 Ground (+12V dc Return) 10 +3.3V dc 11 Ground (+3.3 dc Return) 12 +3.3V dc 13 Ground (+3.3V dc Return) 14 +3.3V dc 15 +5V dc 16 Ground (+5V dc Return) Additional Documentation There are two other manuals that you will need in order to install and operate your new Ethernet switch.
Appendix A Translated Electrical Safety and Emission Information IMPORTANT: This appendix contains multiple-language translations for the safety statements in this guide. WICHTIG: Dieser Anhang enthält Übersetzungen der in diesem Handbuch enthaltenen Sicherheitshinweise in mehreren Sprachen. VIGTIGT: Dette tillæg indeholder oversættelser i flere sprog af sikkerhedsadvarslerne i denne håndbog. BELANGRIJK: Deze appendix bevat vertalingen in meerdere talen van de veiligheidsopmerkingen in deze gids.
Translated Electrical Safety and Emission Information Standards: This product meets the following standards: U.S. Federal Communications Commission RADIATED ENERGY Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
AT-8316F and AT-8324 Quick Install Guide ! 13 CAUTION: Air vents must not be blocked and must have free access to the room ambient air for cooling. ! 14 OPERATING TEMPERATURE: This product is designed for a maximum ambient temperature of 40° degrees C. ! 15 ALL COUNTRIES: Install product in accordance with local and National Electrical Codes. Normen: Dieses Produkt erfüllt die Anforderungen der nachfolgenden Normen.
Translated Electrical Safety and Emission Information Standarder: Dette produkt tilfredsstiller de følgende standarder. !1 Radiofrekvens forstyrrelsesemission !2 ADVARSEL: I et hjemligt miljø kunne dette produkt forårsage radio forstyrrelse. Bliver det tilfældet, påkræves brugeren muligvis at tage tilstrækkelige foranstaltninger. !3 Immunitet EN50082-1 1997 !4 Elektrisk sikkerhed EN60950, UL1950, CSA 950 !5 Laser EN60825 EN55022 Klasse A SIKKERHED !6 ADVARSE Laserprodukt av klasse 1.
AT-8316F and AT-8324 Quick Install Guide VEILIGHEID !6 WAARSHUWING Klasse-1 laser produkt. !7 WAARCHUWING Neit in de straal staren. !8 WAARSCHUWINGEN MET BETREKKING TOT ELEKTRICITEIT WAARSCHUWING: GEVAAR VOOR ELEKTRISCHE SCHOKKEN Verwijder het deksel niet, teneinde ELEKTRISCHE schokken te voorkomen. Binnenin bevinden zich geen onderdelen die door de gebruiker onderhouden kunnen worden.
Translated Electrical Safety and Emission Information !9 DANGER DE FOUDRE DANGER: NE PAS MANIER le matériel ou les CÂBLES lors d’activité orageuse. ! 10 ATTENTION: LE CORDON D’ALIMENTATION SERT DE MISE HORS CIRCUIT. POUR COUPER L’ALIMENTATION DU MATÉRIEL, débrancher le cordon. ! 11 ÉQUIPEMENT DE CLASSE 1 ÉLECTRIQUE CE MATÉRIEL DOIT ÊTRE MIS A LA TERRE.
AT-8316F and AT-8324 Quick Install Guide ! 14 KÄYTTÖLÄMPÖTILA: Tämä tuote on suunniteltu ympäröivän ilman maksimilämpötilalle 40°C. ! 15 KAIKKI MAAT: Asenna tuote paikallisten ja kansallisten sähköturvallisuusmääräysten mukaisesti. Standard: Questo prodotto è conforme ai seguenti standard. !1 Emissione RFI (interferenza di radiofrequenza) EN55022 Classe A !2 AVVERTENZA: in ambiente domestico questo prodotto potrebbe causare radio interferenza.
Translated Electrical Safety and Emission Information Sikkerhetsnormer: Dette produktet tilfredsstiller følgende sikkerhetsnormer. !1 RFI stråling !2 ADVARSEL: Hvis dette produktet benyttes til privat bruk, kan produktet forårsake radioforstyrrelse. Hvis dette skjer, må brukeren ta de nødvendige forholdsregler. !3 Immunitet EN50082-1 1997 !4 Elektrisk sikkerhet EN60950, UL1950, CSA 950 !5 Laser EN60825 EN55022 Klasse A SIKKERHET !6 ADVARSEL Laserprodukt av klasse 1.
AT-8316F and AT-8324 Quick Install Guide !6 AVISO Produto laser de classe 1 !7 AVISO Não olhe fixamente para o raio. !8 AVISOS SOBRE CARACTERÍSTICAS ELÉTRICAS ATENÇÃO: PERIGO DE CHOQUE ELÉTRICO Para evitar CHOQUE ELÉTRICO, não retire a tampa. Não contém peças que possam ser consertadas pelo usuário. Este aparelho contém VOLTAGENS PERIGOSAS e só deve ser aberto por um técnico qualificado e treinado.
Translated Electrical Safety and Emission Information !9 PELIGRO DE RAYOS PELIGRO: NO REALICE NINGUN TIPO DE TRABAJO O CONEXION en los equipos o en LOS CABLES durante TORMENTAS ELECTRICAS. ! 10 ATENCION: EL CABLE DE ALIMENTACION SE USA COMO UN DISPOSITIVO DE DESCONEXION. PARA DESACTIVAR EL EQUIPO, desconecte el cable de alimentación. ! 11 ELECTRICO - EQUIPO DEL TIPO CLASE 1 ESTE EQUIPO TIENE QUE TENER CONEXION A TIERRA. El cable tiene que conectarse a un enchufe a tierra debidamente instalado.
AT-8316F and AT-8324 Quick Install Guide ! 13 VARNING: Luftventilerna får ej blockeras och måste ha fri tillgång till omgivande rumsluft för avsvalning. ! 14 DRIFTSTEMPERATUR: Denna produkt är konstruerad för rumstemperatur ej överstigande 40 grader Celsius. ! 15 ALLA LÄNDER: Installera produkten i enlighet med lokala och statliga bestämmelser för elektrisk utrustning.
Appendix B AT-8316F and AT-8324 Quick Install Guide Feedback Please tell us what additional information you would like to see discussed in this guide. If there are topics you would like information on that were not covered in this guide, please photocopy this page, answer the questions and fax or mail this form back to Allied Telesyn International. The mailing address and fax number are at the bottom of the page. Your comments are valuable when we plan future revisions of this guide.
Appendix C Technical Support Fax Order Name_________________________________________________________________ Company_____________________________________________________________ Address ______________________________________________________________ City ___________________ State/Province_______________________________ Zip/Postal Code ______________ Country_______________________________ Phone _____________________________Fax________________________________ Incident Summary Model number of Allied Telesyn
Appendix D Where To Find Us For Technical Support or Service Location Phone Fax Americas United States, Canada, Mexico, Central America, South America 1 (800) 428-4835 1 (503) 639-3176 Asia Singapore, Taiwan, Thailand, Malaysia, Indonesia, Korea, Philippines, China, India, Hong Kong (+65) 3815-612 (+65) 3833-830 Australia Australia, New Zealand 1 (800) 000-880 (+61) 2-9438-4966 France France, Belgium, Luxembourg, The Netherlands, Middle East, Africa (+33) 1-60-92-15-25 (+33) 1-69-28-37-49 Ge
