User`s guide

AT-S62 Management Software Menus Interface User’s Guide
Section V: VLANs 609
WAN. This port is placed as a tagged port in each VLAN. Thus, while the
switch ports are separated from each other in their individual VLANs, they
all have access to the uplink port.
The uplink port also has its own VLAN, where it is an untagged member.
This VLAN is called Uplink_VLAN.
Note
In 802.1Q Multiple VLAN mode, the device connected to the uplink
port must be IEEE 802.1Q-compliant.
An example of the 802.1Q-compliant VLAN mode is shown in Table 25.
The table shows the VLANs on an AT-8524M switch where Port 25, a port
on an expansion module, has been selected as the uplink port.
Table 25. 802.1Q-Compliant Multiple VLAN Example
VLAN Name VID Untagged Port Tagged Port
Client_VLAN_1 1 1 25
Client_VLAN_2 2 2 25
Client_VLAN_3 3 3 25
Client_VLAN_4 4 4 25
Client_VLAN_5 5 5 25
Client_VLAN_6 6 6 25
Client_VLAN_7 7 7 25
Client_VLAN_8 8 8 25
Client_VLAN_9 9 9 25
Client_VLAN_10 10 10 25
Client_VLAN_11 11 11 25
Client_VLAN_12 12 12 25
Client_VLAN_13 13 13 25
Client_VLAN_14 14 14 25
Client_VLAN_15 15 15 25
Client_VLAN_16 16 16 25
Client_VLAN_17 17 17 25
Client_VLAN_18 18 18 25