AT-A14 AT-A15/SX, LX AT-A22/SX, LX AT-A24/SX, LX 1000Base Expansion Modules Quick Install Guide PN 613-50133-00 Rev B
Copyright 2000 Allied Telesyn International, Corp. 960 Stewart Drive Suite B, Sunnyvale CA 94085, USA All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesyn International, Corp. Ethernet is a registered trademark of Xerox Corporation. All other product names, company names, logos or other designations mentioned herein are trademarks or registered trademarks of their respective owners. Allied Telesyn International, Corp.
Electrical Safety and Emission Statement Standards: The Ethernet switches in which these products can be installed meet the following standards. U.S. Federal Communications Commission RADIATED ENERGY Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Table of Contents Electrical Safety and Emission Statement .............................................. iii Welcome to Allied Telesyn .......................................................................... vii Where to Find Web-based Guides ................................................................... vii Document Conventions ................................................................................... viii Contacting Allied Telesyn .........................................................
Welcome to Allied Telesyn This guide contains instructions on how to install an Allied Telesyn 1000Base Series Expansion Module in a Fast Ethernet or Gigabit Ethernet switch.
Document Conventions This guide uses several conventions that you should become familiar with first before you begin to install the product. Note A note provides additional information. Caution A caution indicates that performing or omitting a specific action may result in equipment damage or loss of data. Warning A warning indicates that performing or omitting a specific action may result in bodily injury.
1000Base Expansion Module Quick Install Guide Australia Australia, New Zealand Tel: 1 (800) 000-880 Fax: (+61) 2-9438-4966 Japan Tel: (+81) 3-3443-5640 Fax: (+81) 3-3443-2443 France France, Belgium, Luxembourg, The Netherlands Tel: (+33) 1-60-92-15-25 Fax: (+33) 1-69-28-37-49 United Kingdom United Kingdom, Denmark, Norway, Sweden, Finland, Iceland Tel: (+44) 1-235-442560 Fax: (+44) 1-235-442680 E-mail Support United States and Canada TS1@alliedtelesyn.
FTP Server If you need a device driver for an Allied Telesyn device and you know the name of the driver, you can download the software by connecting directly to our FTP server at ftp://gateway.centre.com. At login, enter ‘anonymous’. Enter your e-mail address for the password as requested by the server at login. For Sales or Corporate Information Allied Telesyn International, Corp.
1000Base Series Expansion Modules The 1000Base Series Expansion Modules are designed for the Fast Ethernet and Gigabit Ethernet switches from Allied Telesyn. You can use the modules to extend your network to remote sites, build a Gigabit Ethernet backbone, and connect additional nodes to the network, such as high-speed servers. Table 1 lists the 1000Base Series Expansion Modules.
Installing a 1000Base Series Expansion Module The following sections contain instructions on how to install an expansion module in an Allied Telesyn switch. Verifying the Package Contents Check to be sure that your package contains the following items. If any of the items are missing or damaged, contact your Allied Telesyn representative.
1000Base Expansion Module Quick Install Guide Warning Electrical-Type Class 1 Equipment: This equipment must be earthed. The power plug must be connected to a properly wired earth ground socket outlet. An improperly wired socket outlet could place hazardous voltages on accessible metal parts. 11 Caution Pluggable Equipment: The socket outlet should be installed near the equipment and should be easily accessible.
Table 2 Cabling Specifications (Continued) Model Type of Connector Type of Cable1 AT-A15/LX2 SC 50/125 or 62.5/125 micron 2 - 550 m (7 - 1,804 ft)3 multimode fiber optic cable AT-A22/SX SC Maximum Cable Length 9/125 micron single-mode fiber optic cable 2 m - 10 km (7 ft - 6.2 mi) 50/125 micron multimode fiber optic cable 2 - 550 m (7 - 1,804 ft)3 62.5/125 micron 2 - 275 m (7 - 902 ft)4 multimode fiber optic cable AT-A22/LX AT-A24/SX SC MT-RJ 50/125 or 62.
1000Base Expansion Module Quick Install Guide Installing the Module To install an expansion module in an Allied Telesyn switch, perform the following steps: 1. Disconnect the switch’s power cord, if attached. Caution Do not install the module with the switch powered ON. Doing so can damage the module. Warning The power cord is used as a disconnect device. To de-energize equipment, disconnect the power cord. 10 2.
If you are installing only one expansion module in the switch, it is recommended that you install the module in slot A. While the module will work in slot B with slot A empty, the port numbering assignments will change if you later install a module in slot A. This could affect the VLAN memberships on the switch and this could require you to adjust your VLAN configurations.
1000Base Expansion Module Quick Install Guide 5. Secure the expansion module to the switch by tightening the captive screws. 6. Apply power to the switch by re-attaching the power cord to the switch. Verify that the Power LED lights green. 7. Remove the dust cover from the port(s) on the expansion module and connect the data cable(s). See Table 2 for cable type and maximum length. Note The AT-A14 module does not come with a dust cover. 8.
Replacing the GBIC Module in an AT-A15 Expansion Module Both the AT-A15/SX expansion module and AT-A15/LX expansion module come with a pre-installed GBIC module. The AT-A15/SX comes with the 1000Base-SX GBIC module (AT-G8SX) and the AT-A15/LX module comes with the 1000Base-LX module (AT-G8LX). If desired, you can replace the GBIC module that comes with the expansion module with another GBIC module of the same type or a different type.
1000Base Expansion Module Quick Install Guide 3. Slide the new GBIC module into the expansion slot and push it in until it clicks. Refer to Figure 4. AT-A15 ACTIVITY LINK A 1000BAS FULL DUP E-X COL HALF DUP B Figure 4 Installing a GBIC Module 4. Remove the dust cover and attach the fiber cables. It is important to leave the dust cover in place if you are not attaching the cables at this time. Dust in the ports can degrade transmission. The expansion module is now ready for use.
Technical Specifications Table 4 lists the technical specifications for the fiber optic ports on the expansion modules. Table 4 Technical Specifications for the Fiber Optic Ports Module Wavelength Cable (nm) (µm) Output Optical Power (dBm) Input Optical Power (dBm) Min. Max. Min. Max. AT-A15/SX 850 50/125 or 62.5/125 MMF -9.5 -4 -17 0 AT-A15/LX 1300 9/125 SMF -9.5 -3 -20 -3 50/125 or 62.5/125 MMF -11.5 -3 AT-A22/SX 850 50/125 or 62.5/125 MMF -9.
Appendix A Translated Safety and Emission Information Important: This appendix contains multiple-language translations for the safety statements in this guide. Wichtig: Dieser Anhang enthält Übersetzungen der in diesem Handbuch enthaltenen Sicherheitshinweise in mehreren Sprachen. Vigtigt: Dette tillæg indeholder oversættelser i flere sprog af sikkerhedsadvarslerne i denne håndbog. Belangrijk: Deze appendix bevat vertalingen in meerdere talen van de veiligheidsopmerkingen in deze gids.
Standards: This product meets the following standards. U.S. Federal Communications Commission RADIATED ENERGY Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
1000Base Expansion Module Quick Install Guide 12 PLUGGABLE EQUIPMENT, the socket outlet shall be installed near the equipment and shall be easily accessible. 13 CAUTION: Air vents must not be blocked and must have free access to the room ambient air for cooling. 14 OPERATING TEMPERATURE: This product is designed for a maximum ambient temperature of 40° degrees C. 15 ALL COUNTRIES: Install product in accordance with local and National Electrical Codes.
14 Standarder: Dette produkt tilfredsstiller de følgende standarder. 1 Radiofrekvens forstyrrelsesemission 2 ADVARSEL: I et hjemligt miljø kunne dette produkt forårsage radio forstyrrelse. Bliver det tilfældet, påkræves brugeren muligvis at tage tilstrækkelige foranstaltninger. 3 Immunitet EN50082-1 1997 4 Elektrisk sikkerhed EN60950, UL1950, CSA 950 5 Laser EN60825 EN55022 Klasse A SIKKERHED 6 ADVARSEL Laserprodukt av klasse 1.
1000Base Expansion Module Quick Install Guide Eisen: Dit product voldoet aan de volgende eisen. 1 RFI Emissie 2 WAARSCHUWING: Binnenshuis kan dit product radiostoring veroorzaken, in welk geval de gebruiker verplicht kan worden om gepaste maatregelen te nemen. 3 Immuniteit EN50082-1 1997 4 Electrische Veiligheid EN60950, UL1950, CSA 950 5 Laser EN60825 EN55022 Klasse A VEILIGHEID 6 WAARSHUWING Klasse-1 laser produkt. 7 WAARCHUWING Neit in de straal staren.
16 Normes: ce produit est conforme aux normes de suivantes. 1 Emission d’interférences radioélectriques 2 MISE EN GARDE : dans un environnement domestique, ce produit peut provoquer des interférences radioélectriques. Auquel cas, l’utilisateur devra prendre les mesures adéquates. 3 Immunité EN50082 - 1 1997 4 Sécurité électrique EN60950, UL1950, CSA 950 5 Laser EN60825 EN55022 Classe A SÉCURITÉ. 6 ATTENTION Producit laser di classe 1.
1000Base Expansion Module Quick Install Guide Standardit: Tämä tuote on seuraavien standardien mukainen. 1 Radioaaltojen häirintä 2 VAROITUS: Kotiolosuhteissa tämä laite voi aiheuttaa radioaaltojen häiröitä, missä tapauksessa laitteen käyttäjän on mahdollisesti ryhdyttävä tarpeellisiin toimenpiteisiin. 3 Kestävyys EN50082-1 1997 4 Sähköturvallisuus EN60950, UL1950, CSA 950 5 Laser EN60825 EN55022 Luokka A TURVALLISUUS 6 VAROITUS Luokan 1 Lasertuote.
18 Standard: Questo prodotto è conforme ai seguenti standard. 1 Emissione RFI (interferenza di radiofrequenza) 2 AVVERTENZA: in ambiente domestico questo prodotto potrebbe causare radio interferenza. In questo caso potrebbe richiedersi all’utente di prendere gli adeguati provvedimenti. 3 Immunità EN50082-1 1997 4 Sicurezza elettrica EN60950, UL1950, CSA 950 5 Laser EN60825 EN55022 Classe A NORME DI SICUREZZA 6 AVVERTENZA Prodotto laser di Classe 1.
1000Base Expansion Module Quick Install Guide Sikkerhetsnormer: Dette produktet tilfredsstiller følgende sikkerhetsnormer. 1 RFI stråling 2 ADVARSEL: Hvis dette produktet benyttes til privat bruk, kan produktet forårsake radioforstyrrelse. Hvis dette skjer, må brukeren ta de nødvendige forholdsregler. 3 Immunitet EN50082-1 1997 4 Elektrisk sikkerhet EN60950, UL1950, CSA 950 5 Laser EN60825 EN55022 Klasse A SIKKERHET 6 ADVARSEL Laserprodukt av klasse 1.
20 Padrões: Este produto atende aos seguintes padrões. 1 Emissão de interferência de radiofrequência 2 AVISO: Num ambiente doméstico este produto pode causar interferência na radiorrecepção e, neste caso, pode ser necessário que o utente tome as medidas adequadas. 3 Imunidade EN50082-1 1997 4 Segurança Eléctrica EN60950, UL1950, CSA 950 5 Laser EN60825 EN55022 Classe A SEGURANÇA 6 AVISO Produto laser de classe 1. 7 AVISO Não olhe fixamente para o raio.
1000Base Expansion Module Quick Install Guide Estándares: Este producto cumple con los siguientes estándares. 1 Emisión RFI 2 ADVERTENCIA: en un entorno doméstico, este producto puede causar radiointerferencias, en cuyo caso, puede requerirse del usuario que tome las medidas que sean convenientes al respecto.
22 Standarder: Denna produkt uppfyller följande standarder. 1 Radiostörning 2 VARNING: Denna produkt kan ge upphov till radiostörningar i hemmet, vilket kan tvinga användaren till att vidtaga erforderliga åtgärder. 3 Immunitet EN50082-1 1997 4 Elsäkerhet EN60950, UL1950, CSA 950 5 Laser EN60825 EN55022 Klass A SÄKERHET 6 VARNING! Laserprodukt av klass 1. 7 VARNING! Laserstrålning när enheten är öppen.
Appendix B Technical Support Fax Order Name __________________________________________________________________ Company _______________________________________________________________ Address ________________________________________________________________ City ________________________ State/Province_______________________________ Zip/Postal Code ____________________ Country_______________________________ Phone _______________________________ Fax_______________________________ Incident Summary Allied Tele
Appendix C 1000Base Expansion Module Quick Install Guide Feedback Please tell us what additional information you would like to see discussed in this guide. If there are topics you would like information on that were not covered in this guide, please photocopy this page, answer the questions and fax or mail this form back to Allied Telesyn. The mailing address and fax number are at the bottom of the page. Your comments are valuable when we plan future revisions of this guide.