Install guide

2
Installing a 1000Base Series Expansion Module
The following sections contain instructions on how to install an expansion
module in an Allied Telesyn switch.
Verifying the Package Contents
Check to be sure that your package contains the following items. If any of the
items are missing or damaged, contact your Allied Telesyn representative.
❑ One 1000Base Series Expansion Module
❑ This Quick Install Guide
❑ Warranty card
Reviewing Safety Precautions
Please review the following safety precautions before you begin to install the
expansion module in the switch.
Laser
Class 1 laser product. 6
Laser
Do not stare into the laser beam. 7
Warning
Electric Shock Hazard: To prevent electric shock, do not remove the
cover. There are no user-serviceable parts inside. The unit contains
hazardous voltages and should only be opened by a trained and
qualified technician. 8
Warning
Lightning Danger: Do not work on this equipment or cables during
periods of lightning activity. 9
Warning
Power cord is used as a disconnection device: To de-energize
equipment, disconnect the power cord. 10