Installation guide

Chapter 5: Installing the Windows Drivers

Using the

Installer

Please read the following information before installing the driver:

 Microsoft Windows Operating Systems do not have wizards but

will attempt to install the driver automatically. These processes

should be cancelled. Only the installer should be used to install the

driver.

 Do not use any Microsoft Windows wizards to install the driver. All

wizards and informational boxes should be closed or cancelled

before running the installer.

The Installer has a graphical interactive installation mode. To install the

AT-ANC10S/2 and AT-ANC10S/4 drivers on a Windows Operating

System, do the following:

1. From the driver directory, select the setup.exe file and Run.

The Broadcom NetXtreme II Driver Installer - InstallShield Wizard

Page is displayed. See Figure 13 on page 57.