AT-BRPS8000 Redundant Power Supply For the AT-8324SX Fast Ethernet Switch Installation Guide PN 613-50112-00 Rev A
Copyright 2000 Allied Telesyn International, Corp. 960 Stewart Drive Suite B, Sunnyvale CA 94086 USA All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesyn International, Corp. Ethernet is a registered trademark of Xerox Corporation. All other product names, company names, logos or other designations mentioned herein are trademarks or registered trademarks of their respective owners. Allied Telesyn International, Corp.
Electrical Safety and Emission Statement Standards: This product meets the following standards. U.S. Federal Communications Commission RADIATED ENERGY Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Table of Contents Electrical Safety and Emission Statement ..............................................iii Welcome to Allied Telesyn ......................................................................... vii Where to Find Web-based Guides.................................................................... vii Document Conventions..................................................................................... vii Contacting Allied Telesyn ...........................................................
Welcome to Allied Telesyn This guide contains instructions on how to install the AT-BRPS8000 Redundant Power Supply Unit. The unit is designed for the AT-8324SX Fast Ethernet Switch. Where to Find Web-based Guides The Allied Telesyn web site at www.alliedtelesyn.com provides you with an easy way to access the most recent documentation and technical information for all of our products.
Contacting Allied Telesyn There are several ways to contact Allied Telesyn technical support: online, telephone, fax, and e-mail. Online Support You can request technical support online by filling out the Tech-Assistant Form at www.alliedtelesyn.com/support.htm.
AT-BRPS8000 Installation Guide Returning Products Products for return or repair must first be assigned a Return Materials Authorization (RMA) number. A product sent to Allied Telesyn without a RMA number will be returned to the sender at the sender’s expense.
For Sales or Corporate Information Allied Telesyn International, Corp. 19800 North Creek Parkway, Suite 200 Bothell, WA 98011 Tel: 1 (425) 487-8880 Fax: 1 (425) 489-9191 Allied Telesyn International, Corp.
Overview The AT-BRPS8000 Redundant Power Supply can supply 150 watts of backup power to an AT-8324SX Fast Ethernet Switch in the event of an AC power loss or the failure of the switch’s internal power supply. Caution The AT-BRPS8000 unit is designed for the AT-8324SX Fast Ethernet Switch only. Do not attempt to use this product with any other Allied Telesyn device. Installing the AT-BRPS8000 Unit The following sections contain instructions on how to install the unit.
Reviewing Safety Guidelines Please review the following safety guidelines before you begin to install the stacking module. Warning Electric Shock Hazard: To prevent electric shock, do not remove the cover. There are no user-serviceable parts inside. The unit contains hazardous voltages and should only be opened by a trained and qualified technician. ! 5 Warning Lightning Danger: Do not work on this equipment or cables during periods of lightning activity.
AT-BRPS8000 Installation Guide Installing the Unit The AT-BRPS8000 unit can be installed on desktop or in a rack. Caution Do not install the unit on the floor. The case is not waterproof. Caution Do not connect the AT-BRPS8000 unit to an AC power source until the DC backup power cord has been connected to the AT-8324SX switch. To install the unit, perform the following procedure: 1. Remove the AT-BRPS8000 unit from the shipping container and store the shipping material in a safe location. 2.
AT-8324SX Ethernet Switch (Step 4) (Step 6) RS232 EM3570-Agent DCOUTPUT 3.3V 30A 5V 9A 12V 0.7A (Step 4) (Step 7) SNMP/RMONModule 100-240V~50-60Hz3A AT-BRPS8000 Unit (Step 6) (Step 7) Circuit A Circuit B Figure 1 AC and DC Power Cord Connections Warranty Registration When you have finished installing the AT-BRPS8000 unit, register your product by completing the enclosed warranty card and sending it in, or by visiting our web site at www.alliedtelesyn.com/forms/warranty.
AT-BRPS8000 Installation Guide Technical Specifications Lists the technical specifications of the unit. Table 1 Technical Specifications Physical Specifications Dimensions (W x D x H): 22.28 x 9.1 x 4.5 cm (8.77 x 3.58 x 1.77 in) Weight 1.75 kg (3.
Appendix A Translated Electrical Safety and Emission Information Important: This appendix contains multiple-language translations for the safety statements in this guide. Wichtig: Dieser Anhang enthält Übersetzungen der in diesem Handbuch enthaltenen Sicherheitshinweise in mehreren Sprachen. Vigtigt: Dette tillæg indeholder oversættelser i flere sprog af sikkerhedsadvarslerne i denne håndbog. Belangrijk: Deze appendix bevat vertalingen in meerdere talen van de veiligheidsopmerkingen in deze gids.
Standards: This product meets the following standards: U.S. Federal Communications Commission RADIATED ENERGY Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
AT-BRPS8000 Installation Guide ! 10 CAUTION: Air vents must not be blocked and must have free access to the room ambient air for cooling. ! 11 OPERATING TEMPERATURE: This product is designed for a maximum ambient temperature of 40° degrees C. ! 12 ALL COUNTRIES: Install product in accordance with local and National Electrical Codes. Normen: Dieses Produkt erfüllt die Anforderungen der nachfolgenden Normen.
Standarder: Dette produkt tilfredsstiller de følgende standarder. !1 Radiofrekvens forstyrrelsesemission !2 ADVARSEL: I et hjemligt miljø kunne dette produkt forårsage radio forstyrrelse. Bliver det tilfældet, påkræves brugeren muligvis at tage tilstrækkelige foranstaltninger. !3 Immunitet IEC 1000-4-2 (4 kV CD, 8 kV AD) IEC 1000-4-3 (1995) (3 V/m) IEC 1000-4-4 (1995) (1.0 kV - (power line); 0.5 kV - (signal line)) IEC 1000-4-6 (1995) (3 Vrms) !4 Elektrisk sikkerhed UL 1950, CSA 22.2 No.
AT-BRPS8000 Installation Guide Eisen: Dit product voldoet aan de volgende eisen. !1 RFI Emissie !2 WAARSCHUWING: Binnenshuis kan dit product radiostoring veroorzaken, in welk geval de gebruiker verplicht kan worden om gepaste maatregelen te nemen. !3 Immuniteit IEC 1000-4-2 (4 kV CD, 8 kV AD) IEC 1000-4-3 (1995) (3 V/m) IEC 1000-4-4 (1995) (1.0 kV - (power line); 0.5 kV - (signal line)) IEC 1000-4-6 (1995) (3 Vrms) !4 Electrische Veiligheid UL 1950, CSA 22.2 No.
Normes: ce produit est conforme aux normes de suivantes: !1 Emission d’interférences radioélectriques !2 MISE EN GARDE : dans un environnement domestique, ce produit peut provoquer des interférences radioélectriques. Auquel cas, l’utilisateur devra prendre les mesures adéquates. !3 Immunité IEC 1000-4-2 (4 kV CD, 8 kV AD) IEC 1000-4-3 (1995) (3 V/m) IEC 1000-4-4 (1995) (1.0 kV - (power line); 0.5 kV - (signal line)) IEC 1000-4-6 (1995) (3 Vrms) !4 Sécurité électrique UL 1950, CSA 22.2 No.
AT-BRPS8000 Installation Guide Standardit: Tämä tuote on seuraavien standardien mukainen. !1 Radioaaltojen häirintä !2 VAROITUS: Kotiolosuhteissa tämä laite voi aiheuttaa radioaaltojen häiröitä, missä tapauksessa laitteen käyttäjän on mahdollisesti ryhdyttävä tarpeellisiin toimenpiteisiin. !3 Kestävyys IEC 1000-4-2 (4 kV CD, 8 kV AD) IEC 1000-4-3 (1995) (3 V/m) IEC 1000-4-4 (1995) (1.0 kV - (power line); 0.5 kV - (signal line)) IEC 1000-4-6 (1995) (3 Vrms) !4 Sähköturvallisuus UL 1950, CSA 22.
Standard: Questo prodotto è conforme ai seguenti standard. !1 Emissione RFI (interferenza di radiofrequenza) !2 AVVERTENZA: in ambiente domestico questo prodotto potrebbe causare radio interferenza. In questo caso potrebbe richiedersi all’utente di prendere gli adeguati provvedimenti. !3 Immunità IEC 1000-4-2 (4 kV CD, 8 kV AD) IEC 1000-4-3 (1995) (3 V/m) IEC 1000-4-4 (1995) (1.0 kV - (power line); 0.5 kV - (signal line)) IEC 1000-4-6 (1995) (3 Vrms) !4 Sicurezza elettrica UL 1950, CSA 22.2 No.
AT-BRPS8000 Installation Guide Sikkerhetsnormer: Dette produktet tilfredsstiller følgende sikkerhetsnormer. !1 RFI stråling !2 ADVARSEL: Hvis dette produktet benyttes til privat bruk, kan produktet forårsake radioforstyrrelse. Hvis dette skjer, må brukeren ta de nødvendige forholdsregler. !3 Immunitet IEC 1000-4-2 (4 kV CD, 8 kV AD) IEC 1000-4-3 (1995) (3 V/m) IEC 1000-4-4 (1995) (1.0 kV - (power line); 0.5 kV - (signal line)) IEC 1000-4-6 (1995) (3 Vrms) !4 Elektrisk sikkerhet UL 1950, CSA 22.
Padrões: Este produto atende aos seguintes padrões. !1 Emissão de interferência de radiofrequência !2 AVISO: Num ambiente doméstico este produto pode causar interferência na radiorrecepção e, neste caso, pode ser necessário que o utente tome as medidas adequadas. !3 Imunidade IEC 1000-4-2 (4 kV CD, 8 kV AD) IEC 1000-4-3 (1995) (3 V/m) IEC 1000-4-4 (1995) (1.0 kV - (power line); 0.5 kV - (signal line)) IEC 1000-4-6 (1995) (3 Vrms) !4 Segurança Eléctrica UL 1950, CSA 22.2 No.
AT-BRPS8000 Installation Guide Estándares: Este producto cumple con los siguientes estándares. !1 Emisión RFI !2 ADVERTENCIA: en un entorno doméstico, este producto puede causar radiointerferencias, en cuyo caso, puede requerirse del usuario que tome las medidas que sean convenientes al respecto. !3 Inmunidad IEC 1000-4-2 (4 kV CD, 8 kV AD) IEC 1000-4-3 (1995) (3 V/m) IEC 1000-4-4 (1995) (1.0 kV - (power line); 0.
Standarder: Denna produkt uppfyller följande standarder. !1 Radiostörning !2 VARNING: Denna produkt kan ge upphov till radiostörningar i hemmet, vilket kan tvinga användaren till att vidtaga erforderliga åtgärder. !3 Immunitet IEC 1000-4-2 (4 kV CD, 8 kV AD) IEC 1000-4-3 (1995) (3 V/m) IEC 1000-4-4 (1995) (1.0 kV - (power line); 0.5 kV - (signal line)) IEC 1000-4-6 (1995) (3 Vrms) !4 Elsäkerhet UL 1950, CSA 22.2 No.
Appendix B Technical Support Fax Order Name _________________________________________________________________ Company ______________________________________________________________ Address _______________________________________________________________ City______________________ State/Province_______________________________ Zip/Postal Code ________________ Country_______________________________ Phone ______________________________ Fax_______________________________ Incident Summary Model number of Allied
Appendix C AT-BRPS8000 Installation Guide Feedback Please tell us what additional information you would like to see discussed in this guide. If there are topics you would like information on that were not covered in this guide, please photocopy this page, answer the questions and fax or mail this form back to Allied Telesyn. The mailing address and fax number are at the bottom of the page. Your comments are valuable when we plan future revisions of this guide.
