AT-EX1001SC/GM1 Gigabit Ethernet Multimode Extender Installation Guide PN 613-10857-00 Rev A
Copyright 2000 Allied Telesyn International, Corp. 960 Stewart Drive Suite B, Sunnyvale CA 94085 USA All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesyn International, Corp. Ethernet is a registered trademark of Xerox Corporation. All other product names, company names, logos or other designations mentioned herein are trademarks or registered trademarks of their respective owners. Allied Telesyn International, Corp.
Electrical Safety and Emission Statement Standards: This product meets the following standards. U.S. Federal Communications Commission RADIATED ENERGY Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Table of Contents Electrical Safety and Emission Statement ............................................. iii Welcome to Allied Telesyn ......................................................................... vii Where to Find Web-based Guides .................................................................. vii Document Conventions ................................................................................... vii Contacting Allied Telesyn .............................................................
Welcome to Allied Telesyn This guide contains instructions on how to install the AT-EX1001SC/GM1 Gigabit Ethernet Multimode Extender. Where to Find Web-based Guides The Allied Telesyn web site at www.alliedtelesyn.com provides you with an easy way to access the most recent documentation and technical information for all of our products. All web-based documents relating to this product and other Allied Telesyn products can be downloaded from the web site in PDF format.
Contacting Allied Telesyn There are several ways that you can contact Allied Telesyn technical support: online, telephone, fax, or e-mail. Online Support You can request technical support online by filling out the Online Technical Support Form at www.alliedtelesyn.com/forms/support.htm.
AT-EX1001SC/GM1 Installation Guide Returning Products Products for return or repair must first be assigned a Return Materials Authorization (RMA) number. A product sent to Allied Telesyn without a RMA number will be returned to the sender at the sender’s expense.
For Sales or Corporate Information Allied Telesyn International, Corp. 19800 North Creek Parkway, Suite 200 Bothell, WA 98011 Tel: 1 (425) 487-8880 Fax: 1 (425) 489-9191 Allied Telesyn International, Corp.
Overview The AT-EX1001SC/GM1 Gigabit Ethernet Multimode Extender (Figure 1) allows you to extend the maximum distance of standard multimode fiber cable for 1000Base-SX Gigabit Ethernet beyond the distance limitations imposed by the current IEEE 802.3z standard. With this unit, you can extend your network up to 2 kilometers (1.24 miles) over 50/125 or 62.5/125 micron multimode fiber optic cabling.
Gigabit Ethernet Technology and FDDI Technology Because of its high-speed and fault-tolerant features, fiber distributed data interface (FDDI) has frequently been used to build backbone networks. However, the growth of new applications that require extremely high rates of throughput, greater than that allowed by FDDI, have emerged and have exceeded the capabilities of FDDI to handle the load. Examples of high demand network applications include streaming audio and video content.
AT-EX1001SC/GM1 Installation Guide 2 km Multimode fiber cable R R AT-EX1001 Gigabit Multimode Extenders 275 m / 550 m 275 m / 550 m PORT ACTIVITY PORT ACTIVITY RS-232 TERMINAL PORT 1000BASE-SX GIGABIT ETHERNET SWITCH 1 2 D/C D/C D/C RX TX RX TX 6 5 L /A LINK ACTIVITY FULL DUP HALF DUP D/C RX TX RS-232 TERMINAL PORT STATUS COL L /A FAULT RPS PWR L /A RESET 4 L /A D/C D/C B D/C TX L /A L /A L /A A AT-8224XL Switch with AT-A15 Expansion Module 3 1000BASE-SX STATUS
Figure 3 illustrates the front panel of the unit. EX1001SC/GM1 Port 1 (P1) 1000Base-X Fiber Optic Port 2 (P2) 1000Base-SX Fiber Optic Figure 3 AT-EX1001SC/GM1 Front Panel Fiber Optic Port 1 (P1) Port 1 is a 1000Base-X port that operates with either 50/125 or 62.5/125 micron multimode fiber and has a maximum operating distance of 2 kilometers (1.24 miles). This port operates in full-duplex mode at 1000 Mbps. Note Port 1 must be connected to Port 1 on another AT-EX1001SC/GM1 Multimode Extender.
AT-EX1001SC/GM1 Installation Guide Port and System LEDs The front panel has several LEDs that display the status of the ports and the unit. Table 1 describes the functions of the LEDs. Table 1 AT-EX1001SC/GM1 LED Indicators LED Description State Indicates System LEDs PWR/ NMS Power Green Extender is powered up and ready for use. LP/BACK Loop Back N/A Not implemented. SD Signal Detect Green Signal is present on this port.
Installing the AT-EX1001SC/GM1 Multimode Extender The AT-EX1001SC/GM1 Multimode Extender is installed and used in pairs. The units do not support the use of any media converters in the configuration. The pair of extenders is connected directly to the host and to each other. The units are easy to install and do not require any software configuration or software management.
AT-EX1001SC/GM1 Installation Guide Selecting a Site Be sure to observe the following requirements when choosing a site for the AT-EX1001SC/GM1 Multimode Extender. ❑ Select a site that is dust-free and moisture-free. ❑ Do not block the ventilation openings on the unit. The site should allow for proper heat dissipation from and adequate ventilation around the unit. ❑ Be sure that the site will allow you to easily access the fiber optic cables and the power cable.
Warning Lightning Danger: Do not work on this equipment or cables during periods of lightening activity. ! 9 Warning Power cord is used as a disconnection device: To de-energize equipment, disconnect the power cord. ! 10 Warning Electrical-Type Class 1 Equipment: This equipment must be earthed. The power plug must be connected to a properly wired earth ground socket outlet. An improperly wired socket outlet could place hazardous voltages on accessible metal parts.
AT-EX1001SC/GM1 Installation Guide Installing the Unit To install the AT-EX1001SC/GM1 Multimode Extender on a desktop, perform the following steps: 1. Remove all components from the shipping package and store the packaging material in a safe location. 2. Locate a level, secure surface for the unit. Warning The power cord is used as a disconnection device. To de-energize equipment, disconnect the power cord. ! 10 3.
Troubleshooting This sections contains troubleshooting recommendations should you encounter any problems with the unit. If the Power LED does not light up after connecting the AC power cord, do the following: ❑ Make sure that the power cord is securely connected to the front of the AT-EX1001SC/GM1 Multimode Extender and that the other end is securely connected to a power outlet. ❑ Try using another power cord to see if power is supplied to the unit.
AT-EX1001SC/GM1 Installation Guide Technical Specifications Table 3 lists the technical specifications of the unit. Table 3 Technical Specifications Specifications Dimensions (W x D x H) 16 cm x 20 cm x 3.8 cm (6.39 in x 7.9 in x 1.5 in) Weight 1.29 kg (2.
Appendix A Translated Safety and Emission Information Important: This appendix contains multiple-language translations for the safety statements in this guide. Wichtig: Dieser Anhang enthält Übersetzungen der in diesem Handbuch enthaltenen Sicherheitshinweise in mehreren Sprachen. Vigtigt: Dette tillæg indeholder oversættelser i flere sprog af sikkerhedsadvarslerne i denne håndbog. Belangrijk: Deze appendix bevat vertalingen in meerdere talen van de veiligheidsopmerkingen in deze gids.
Standards: This product meets the following standards. U.S. Federal Communications Commission RADIATED ENERGY Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
AT-EX1001SC/GM1 Installation Guide ! 12 PLUGGABLE EQUIPMENT, the socket outlet shall be installed near the equipment and shall be easily accessible. ! 13 CAUTION: Air vents must not be blocked and must have free access to the room ambient air for cooling. ! 14 OPERATING TEMPERATURE: This product is designed for a maximum ambient temperature of 40° degrees C. ! 15 ALL COUNTRIES: Install product in accordance with local and National Electrical Codes.
Standarder: Dette produkt tilfredsstiller de følgende standarder. !1 Radiofrekvens forstyrrelsesemission !2 ADVARSEL: I et hjemligt miljø kunne dette produkt forårsage radio forstyrrelse. Bliver det tilfældet, påkræves brugeren muligvis at tage tilstrækkelige foranstaltninger. !3 Immunitet EN50082-1 !4 Elektrisk sikkerhed EN60950, UL 1950 !5 Laser EN60825 EN55022 Klasse A SIKKERHED !6 ADVARSEL Laserprodukt av klasse 1. !7 ADVARSEL Stirr ikke på strålen.
AT-EX1001SC/GM1 Installation Guide Eisen: Dit product voldoet aan de volgende eisen. !1 RFI Emissie !2 WAARSCHUWING: Binnenshuis kan dit product radiostoring veroorzaken, in welk geval de gebruiker verplicht kan worden om gepaste maatregelen te nemen. !3 Immuniteit EN50082-1 !4 Electrische Veiligheid EN60950, UL 1950 !5 Laser EN60825 EN55022 Klasse A VEILIGHEID !6 WAARSHUWING Klasse-1 laser produkt. !7 WAARCHUWING Neit in de straal staren.
Normes: ce produit est conforme aux normes de suivantes: !1 Emission d’interférences radioélectriques EN55022 Classe A !2 MISE EN GARDE : dans un environnement domestique, ce produit peut provoquer des interférences radioélectriques. Auquel cas, l’utilisateur devra prendre les mesures adéquates. !3 Immunité EN50082 - 1 !4 Sécurité électrique EN60950, UL 1950 !5 Laser EN60825 SÉCURITÉ !6 ATTENTION Producit laser di classe 1. !7 ATTENTION Ne pas fixer le faisceau des yeux.
AT-EX1001SC/GM1 Installation Guide Standardit: Tämä tuote on seuraavien standardien mukainen. !1 Radioaaltojen häirintä !2 VAROITUS: Kotiolosuhteissa tämä laite voi aiheuttaa radioaaltojen häiröitä, missä tapauksessa laitteen käyttäjän on mahdollisesti ryhdyttävä tarpeellisiin toimenpiteisiin. !3 Kestävyys EN50082-1 !4 Sähköturvallisuus EN60950, UL 1950 !5 Laser EN60825 EN55022 Luokka A TURVALLISUUS !6 VAROITUS Luokan 1 Lasertuote. !7 VARIOTUS Älä katso säteeseen.
Standard: Questo prodotto è conforme ai seguenti standard. !1 Emissione RFI (interferenza di radiofrequenza) EN55022 Classe A !2 AVVERTENZA: in ambiente domestico questo prodotto potrebbe causare radio interferenza. In questo caso potrebbe richiedersi all’utente di prendere gli adeguati provvedimenti. !3 Immunità EN50082-1 !4 Sicurezza elettrica EN60950, UL 1950 !5 Laser EN60825 NORME DI SICUREZZA !6 AVVERTENZA Prodotto laser di Classe 1. !7 AVERTENZA Non fissare il raggio con gli occhi.
AT-EX1001SC/GM1 Installation Guide Sikkerhetsnormer: Dette produktet tilfredsstiller følgende sikkerhetsnormer. !1 RFI stråling !2 ADVARSEL: Hvis dette produktet benyttes til privat bruk, kan produktet forårsake radioforstyrrelse. Hvis dette skjer, må brukeren ta de nødvendige forholdsregler. !3 Immunitet EN50082-1 !4 Elektrisk sikkerhet EN60950, UL 1950 !5 Laser EN60825 EN55022 Klasse A SIKKERHET !6 ADVARSEL Laserprodukt av klasse 1. !7 ADVARSAL Stirr ikke på strålen.
Padrões: Este produto atende aos seguintes padrões. !1 Emissão de interferência de radiofrequência EN55022 Classe A !2 AVISO: Num ambiente doméstico este produto pode causar interferência na radiorrecepção e, neste caso, pode ser necessário que o utente tome as medidas adequadas. !3 Imunidade EN50082-1 !4 Segurança Eléctrica EN60950, UL 1950 !5 Laser EN60825 SEGURANÇA !6 AVISO Produto laser de classe 1. !7 AVISO Não olhe fixamente para o raio.
AT-EX1001SC/GM1 Installation Guide Estándares: Este producto cumple con los siguientes estándares. !1 Emisión RFI !2 ADVERTENCIA: en un entorno doméstico, este producto puede causar radiointerferencias, en cuyo caso, puede requerirse del usuario que tome las medidas que sean convenientes al respecto. !3 Inmunidad EN50082-1 !4 Seguridad eléctrica EN60950, UL 1950 !5 Laser EN60825 EN55022 Clase A SEGURIDAD !6 ¡ADVERTENCIA! Producto láser Clase 1. !7 ¡ADVERTENCIA! No mirat fijamente el haz.
Standarder: Denna produkt uppfyller följande standarder. !1 Radiostörning !2 VARNING: Denna produkt kan ge upphov till radiostörningar i hemmet, vilket kan tvinga användaren till att vidtaga erforderliga åtgärder. !3 Immunitet EN50082-1 !4 Elsäkerhet EN60950, UL 1950 !5 Laser EN60825 EN55022 Klass A SÄKERHET !6 VARNING! Laserprodukt av klass 1. !7 VARNING! Laserstrålning när enheten är öppen.
Appendix B Technical Support Fax Order Name _________________________________________________________________ Company ______________________________________________________________ Address _______________________________________________________________ City______________________ State/Province_______________________________ Zip/Postal Code ________________ Country_______________________________ Phone ______________________________ Fax_______________________________ Incident Summary Model number of Allied
Appendix C AT-EX1001SC/GM1 Installation Guide Feedback Please tell us what additional information you would like to see discussed in this guide. If there are topics you would like information on that were not covered in this guide, please photocopy this page, answer the questions and fax or mail this form back to Allied Telesyn. The mailing address and fax number are at the bottom of the page. Your comments are valuable when we plan future revisions of this guide.
