Datasheet

The AT-MCR12 is Allied Telesyn’s new media converter
rackmount chassis. This rackmountable unit supports up
to 12 Allied Telesyn media converters. This allows network
managers to have the flexibility to use Allied Telesyn’s
MC1x family (10mbps) or MC10x family (100mbps) in
the same rackmountable chassis.
The chassis is powered by a single internal universal
power supply, eliminating the need for multiple power
connections. Allied Telesyn also offers an optional hot
swappable power supply to eliminate down time on the
network. The unit saves space in the wiring closet and
minimizes the number of power connections required.
The single unit media converters can also be removed
from the AT-MCR12 and deployed individually in order
to accommodate network change.
Whether using one or two power supplies,power is equal-
ly distributed between all media converters. This is
accomplished by incorporating a backplane with 12 dif-
ferent power entry modules integrated with the printed
circuit board.
The chassis is designed with a simple mounting system.
Each individual media converter is plugged into the back
plane and secured with the included mounting rail.
The rackmount chassis has two status LEDs on the front
panel indicating power. The top LED is titled PWR A and
the bottom PWR B. The back panel has one LED for
power. When a redundant power supply is installed, a sec-
ond LED is visible.
The AT-MCR12 is configured with one of the following
power cords to meet regional requirements: North
America, Continental Europe or United Kingdom.
AT-MCR12, Media Conversion Rackmount Chassis
KEY FEATURES
Modular use
with MC1X series (10mbps)
or MC10X series (100mbps)
media converters
Simple installation
12 slot unit
Reliability is insured
by adding an optional
redundant hot swappable
power supply
Lifetime warranty
Free technical support
MEDIA CONVERTERS
AT-MCR12, 12 slot media conversion rackmount chassis