Installation guide

Product Description
18
Features and Components
Figure 1 illustrates the front panel components.
Figure 1 Front Panel (Model AT-9006SX/SC)
Figure 2 shows the location of the AC connector and the Redundant
Power Supply (RPS) input connector on the back panel of the switch.
Figure 2 Back Panel
Six Twisted Pair
100/1000 Mbps
Ports
(AT-9006T)
The AT-9006T Gigabit Ethernet Switch features six twisted pair ports
with RJ-45 connectors. Each port can operate at either 100 Mbps or 1000
Mbps and, when operating at 100 Mbps, in either half- or full-duplex
mode. You can either set the speed and duplex mode manually or you
can allow the switch to do it automatically through auto-negotiation.
Each port has a maximum operating distance of 100 m (328 ft.). The
switch requires Category 5 or Enhanced Category 5 twisted pair cabling.
Each port is IEEE 802.3ab compatible and can operate as either MDI or
MDI-X. The ports are configured automatically when connected to an
end node. No crossover cables are required.
STATUS
RESET
FAULT
RPS
PWR
1000BASE-SX
A
B
RS-232
TERMINAL PORT
PORT ACTIVITY
L/A
D/C
L/A
D/C
L/A
D/C
L/A
D/C
L/A
D/C
L/A
D/C
LINK ACTIVITY
FULL DUP
L/A
D/C
HALF DUP
COL
1
RXTX
4
RXTX
2
RXTX
5
RXTX
3
RXTX
6
RXTX
AT-9006SX/SC
1000BASE-SX GIGABIT ETHERNET SWITCH
CLASS 1
LASER PRODUCT
DO NOT STARE
INTO BEAM
Expansion Module Slots
Reset Button
RPS LED
RS232 Connector
1000Base-SX ports
Port LEDs
LED Color Function Key
Fault LED
Power LED
RPS
AC Power
Connector
Connector