Operation Manual

Operations Manual

Port to ELAN

Conﬁguration

Submenu —

AT-S13

The Port to ELAN Conﬁguration screen displays each UTP port as well as

the logically deﬁned management port.

By default, all devices on a port are in the same ELAN, but you can override

membership assignments for individual devices on a port.

All that is required is that you activate the Port to ELAN

configuration screen (from the LAN emulation submenu) and configure

your user-designated ports to “FIXED.”

A conﬁguration request will be sent to the LECS as new device is attached

(See ELAN Membership on page 52). A device that receives a positive

response from the LECS will join an ELAN. A device that receives a

negative response will join the “default” ELAN (if it has been conﬁgured).

NOTE

Ensure that the management workstation remains on the same ELAN as the

management client port, Port 17. Otherwise you will lose contact with the

switch via Telnet. If you lose contact, either Telnet in from a station on the

management port’s ELAN, or initiate an Omega local session and reassign the

management station’s port to be on the same ELAN as Port 17.

To make ELAN assignments by port:

Enter

p to select the Port to ELAN Configuration submenu. Please note

that this is the default screen.

This screen displays each of the sixteen (16) actual AT-4016TR UTP or

AT-4016F Fiber Optic ports as well as the logically deﬁned management port

(Port #17).

AT-S13 Release 2.4