Manual
Table Of Contents
- Table of Contents
- Preface
- Chapter 1
- Getting Started
- Chapter 2
- Managing the Chassis
- Chapter 3
- Managing the Modules
- Chapter 4
- Configuring the Omega Interface
- Chapter 5
- Upgrading AT-S31 Software and Configuration Files
- Appendix A
- AT-S31 Default Settings
- Appendix B
- Supported PowerBlade Modules
- Appendix C
- Technical Support Fax Order
57
$SSHQGL[$
$76'HIDXOW6HWWLQJV
The following lists the AT-S31 Version 1.0 factory default settings.
Settings Default
IP Address 0.0.0.0
Subnet Mask 0.0.0.0
Gateway Address 0.0.0.0
Download Password ATS31
System Name None
System Contact None
Community Strings
Get Community String public
Set Community String private
Trap Community String public
Omega
Omega Password No password
Omega Time Out Value 5 minutes
Local Access Enabled
Remote Access (Telnet) Enabled
RS232 Port
Bps 9600
Terminal mode VT-100-compatible / ANSI
Data Bits 8
Stop Bits 1
Parity None
Duplex Mode Full-duplex
Data Rate Auto