User Manual

AT-S39 Command Line Interface User’s Guide
125
SET SWITCH VLANMODE
Syntax
set switch vlanmode=tagged|basic
Parameters
vlanmode Specifies the switch’s VLAN mode. Specifying TAGGED
means the switch will support tagged and untagged
VLANs. Specifying BASIC means the switch will
support the Basic VLAN mode. The default is tagged
and untagged VLANs. Only one mode can be active on
a switch at a time.
Description
This command configures a switch to support either port-based and
tagged VLANs or the Basic VLAN mode.
Note
This command performs exactly the same function as the SET
SWITCH VLANSTATUS command.
Example
The following command configures the switch to support the Basic
VLAN mode:
set switch vlanmode=basic