Manual

AT-S62 User’s Guide
Section III: SNMPv3 Operations 299
7. Select one of the following Security Levels:
Note
The value you configure for the Security Level must match the value
configured for the User Name in the Configure SNMPv3 User Table
Menu. See Creating an SNMPv3 User Table Entry on page 234.
N-NoAuthNoPriv
This option represents no authentication and no privacy protocol.
Select this security level if you do not want to authenticate SNMP
users and you do not want to encrypt messages using a privacy
protocol. This security level provides the least security.
Note
If you have selected SNMPv1 or SNMPv2c, N-NoAuthNoPriv is the
only security level you can select.
A-AuthNoPriv
This option represents authentication, but no privacy protocol.
Select this security level if you want to authenticate SNMP users,
but you do not want to encrypt messages using a privacy
protocol.You can select this value if you configured the Security
Model parameter with the SNMPv3 protocol.
P-AuthPriv
This option represents authentication and the privacy protocol.
Select this security level to encrypt messages using a privacy
protocol and authenticate SNMP users. This level provides the
greatest level of security. You can select this value if you
configured the Security Model parameter with the SNMPv3
protocol.
The following prompt is displayed:
Enter Storage Type [V-Volatile, N-NonVolatile]:
8. Select one of the following storage types for this table entry:
V - Volatile
Select this storage type if you do not want the ability to save an
entry in the SNMPv3 Target Parameters Table to the configuration
file. After making changes to an SNMPv3 Target Parameters Table
entry with a Volatile storage type, the S - Save Configuration
Changes option does not appear on the Main Menu.
N-NonVolatile
Select this storage type if you want the ability to save an entry in
the SNMPv3 Target Parameters Table to the configuration file.
After making changes to an SNMPv3 Target Parameters Table