Manual
Table Of Contents
- Table of Contents
- List of Figures
- Preface
- Chapter 1
- Overview
- Section I
- Basic Operations
- Chapter 2
- Starting a Local or Telnet Management Session
- Chapter 3
- Enhanced Stacking
- Chapter 4
- Basic Switch Parameters
- When Does a Switch Need an IP Address?
- Configuring an IP Address and Switch Name
- Activating the BOOTP and DHCP Client Software
- Rebooting a Switch
- Configuring the Manager and Operator Passwords
- Setting the System Time
- Configuring the Console Startup Mode
- Configuring the Console Timer
- Enabling or Disabling the Telnet Server
- Setting the Baud Rate of the RS-232 Terminal Port
- Pinging a Remote System
- Returning the AT-S62 Software to the Factory Default Values
- Viewing System Hardware and Software Information
- Setting the Switch’s Temperature Threshold
- Chapter 5
- SNMPv1 and SNMPv2c Configuration
- Chapter 6
- Port Parameters
- Chapter 7
- MAC Address Table
- Chapter 8
- Port Trunking
- Chapter 9
- Port Mirroring
- Chapter 10
- Ethernet Statistics
- Section II
- Advanced Operations
- Chapter 11
- File System
- Chapter 12
- File Downloads and Uploads
- Chapter 13
- Event Log
- Chapter 14
- Quality of Service
- Chapter 15
- IGMP Snooping
- Chapter 16
- Denial of Service Defense
- Section III
- SNMPv3 Operations
- Chapter 17
- SNMPv3 Configuration
- SNMPv3 Overview
- Configuring the SNMPv3 Protocol
- Configuring the SNMPv3 User Table
- Configuring the SNMPv3 View Table
- Configuring the SNMPv3 Access Table
- Configuring the SNMPv3 SecurityToGroup Table
- Configuring the SNMPv3 Notify Table
- Configuring the SNMPv3 Target Address Table
- Configuring the SNMPv3 Target Parameters Table
- Configuring the SNMPv3 Community Table
- Displaying SNMPv3 Table Menus
- Displaying the Display SNMPv3 User Table Menu
- Displaying the Display SNMPv3 View Table Menu
- Displaying the Display SNMPv3 Access Table Menu
- Displaying the Display SNMPv3 SecurityToGroup Table Menu
- Displaying the Display SNMPv3 Notify Table Menu
- Displaying the Display SNMPv3 Target Address Table Menu
- Displaying the Display SNMPv3 Target Parameters Table Menu
- Displaying the Display SNMPv3 Community Table Menu
- Section IV
- Spanning Tree Protocols
- Chapter 18
- Spanning Tree and Rapid Spanning Tree Protocols
- Chapter 19
- Multiple Spanning Tree Protocol
- Section V
- Virtual LANs
- Chapter 20
- Tagged and Port-based Virtual LANs
- VLAN Overview
- Port-based VLAN Overview
- Tagged VLAN Overview
- Creating a Port-based or Tagged VLAN
- Example of Creating a Port-based VLAN
- Example of Creating a Tagged VLAN
- Modifying a VLAN
- Displaying VLANs
- Deleting a VLAN
- Deleting All VLANs
- Displaying PVIDs and Port Priorities
- Enabling or Disabling Ingress Filtering
- Specifying a Management VLAN
- Chapter 21
- GARP VLAN Registration Protocol
- Chapter 22
- Multiple VLAN Modes
- Section VI
- Port Security
- Section VII
- Management Security
- Chapter 25
- Web Server
- Chapter 26
- Encryption Keys
- Chapter 27
- Public Key Infrastructure Certificates
- Chapter 28
- Secure Shell (SSH) Protocol
- Chapter 29
- RADIUS and TACACS+ Authentication Protocols
- Chapter 30
- Management Access Control List
- Section VIII
- Web Browser Management
- Chapter 31
- Starting a Web Browser Management Session
- Chapter 32
- Enhanced Stacking
- Chapter 33
- Basic Switch Parameters
- Chapter 34
- SNMPv1 and SNMPv2c Community Strings
- Chapter 35
- Port Parameters
- Chapter 36
- MAC Address Table
- Chapter 37
- Port Trunking
- Chapter 38
- Port Mirroring
- Chapter 39
- File Downloads and Uploads
- Chapter 40
- Event Log
- Chapter 41
- Quality of Service
- Chapter 42
- IGMP Snooping
- Chapter 43
- Denial of Service Defense
- Chapter 44
- SNMPv3 Protocol
- Configuring the SNMPv3 Protocol
- Enabling the SNMP Protocol
- Configuring the SNMPv3 User Table
- Configuring the SNMPv3 View Table
- Configuring the SNMPv3 Access Table
- Configuring the SNMPv3 SecurityToGroup Table
- Configuring the SNMPv3 Notify Table
- Configuring the SNMPv3 Target Address Table
- Configuring the SNMPv3 Target Parameters Table
- Configuring the SNMPv3 Community Table
- Displaying SNMPv3 Tables
- Chapter 45
- STP, RSTP, and MSTP
- Chapter 46
- Virtual LANs
- Chapter 47
- GARP VLAN Registration Protocol
- Chapter 48
- MAC Address Security
- Chapter 49
- 802.1x Port-based Access Control
- Chapter 50
- Secure Shell Protocol
- Chapter 51
- Encryption Keys, PKI, and SSL
- Chapter 52
- RADIUS and TACACS+ Authentication Protocols
- Chapter 53
- Management Access Control List
- Appendix A
- AT-S62 Default Settings
- Basic Switch Default Settings
- Enhanced Stacking Default Setting
- SNMP Default Settings
- Port Configuration Default Settings
- Event Log Default Settings
- Quality of Service
- IGMP Snooping Default Settings
- Denial of Service Prevention Default Settings
- STP, RSTP, and MSTP Default Settings
- VLAN Default Settings
- GVRP Default Settings
- MAC Address Security Default Settings
- 802.1x Port-Based Network Access Control Default Settings
- Web Server Default Settings
- SSL Default Settings
- PKI Default Settings
- SSH Default Settings
- Server-Based Authentication Default Settings
- Management Access Control List Default Setting
- AT-S62 Default Settings
- Appendix B
- Index

Chapter 5: SNMPv1 and SNMPv2 Community Strings
Section I: Basic Operations 82
SNMPv1 and SNMPv2c Overview
The Simple Network Management Program (SNMP) is another way for
you to manage the switch. This type of management involves viewing
and changing the management information base (MIB) objects on the
device using an SNMP application program.
The AT-S62 management software supports SNMPv1, SNMPv2c, and
SNMPv3. This chapter explains how to configure the switch’s software
for SNMPv1 and SNMPv2c. For instructions on how to configure the
switch for SNMPv3, refer to Chapter 17, SNMPv3 Configuration on page
222.
The procedures in this chapter show you how to create and manage
SNMPv1 and SNMPv2c community strings through which your SNMP
application program at your management workstation can access the
switch’s MIB objects.
You can also configure SNMPv1 and SNMPv2c with the SNMPv3 Table
menus described in Chapter 17, SNMPv3 Configuration on page 222.
However, because the SNMPv3 Table menus require a much more
extensive configuration, Allied Telesyn recommends configuring
SNMPv1 and SNMPv2c with the procedures in this chapter.
To manage a switch using an SNMP application program, you must do
the following:
❑ Activate SNMP management on the switch. The default setting for
SNMP management is disabled. The procedure for this can be
found in Enabling or Disabling SNMP Management on page 85.
❑ Load the Allied Telesyn MIBs for the switch onto your
management workstation containing the SNMP application
program. The MIBs are available from the Allied Telesyn web site
at www.alliedtelesyn.com.
To manage a switch using SNMP, you need to know the IP address of the
switch or of a master switch and at least one of the switch’s community
strings. A community string is a string of alphanumeric characters that
gives you access to the switch.
A community string has several attributes that you can use to control
who can use the string and what the string will allow a network
management to do on the switch. The community string attributes are
defined below: