Owner manual

332
Chapter 25
802.1x Port-based Access Control
Commands
This chapter contains the following commands:
❑ DISABLE PORTACCESS|PORTAUTH on page 333
❑ DISABLE RADIUSACCOUNTING on page 334
❑ ENABLE PORTACCESS|PORTAUTH on page 335
❑ ENABLE RADIUSACCOUNTING on page 336
❑ SET PORTACCESS|PORTAUTH PORT ROLE=AUTHENTICATOR on
page 337
❑ SET PORTACCESS|PORTAUTH PORT ROLE=SUPPLICANT on page
341
❑ SET RADIUSACCOUNTING on page 343
❑ SHOW PORTACCESS|PORTAUTH on page 345
❑ SHOW PORTACCESS|PORAUTH PORT on page 346
❑ SHOW RADIUSACCOUNTING on page 347
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
Refer to the AT-S62 Management Software User’s Guide for
background information on 802.1x port-based access control.